Summer Special Sale - Limited Time 60% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 575363r9

Welcome To DumpsPedia

648-238 Sample Questions Answers

Questions 4

What is the Cisco video architecture and technology that is embedded into Cisco IP cameras and can simplify deployment of video surveillance, save time, and reduce network configuration errors?

Options:

A.

Videoscape

B.

Medianet

C.

Cisco Discovery Protocol

D.

Media Experience Engine

Buy Now
Questions 5

Which Cisco Video Surveillance IP cameras can be configured as an indoor, vandal-resistant camera, without the use of a third-party external enclosure?

Options:

A.

CIVS-IPC-3520

B.

CIVS-IPC-3530

C.

CIVS-IPC-4500E

D.

CIVS-IPC-6000P

Buy Now
Questions 6

Which switch port capability is recommended for an MSP server?

Options:

A.

Server switch ports should have 10/100 Mb capability

B.

Server switch ports should have 1000 Mb capability

C.

Server switch ports should have 10 Gb capability

D.

Servers should be connected to PoE-capable switches

Buy Now
Questions 7

Which option lists video resolutions in order from lowest to highest (by pixel count)?

Options:

A.

D1, HD, QCIF, CIF

B.

D1, CIF, 4CIF, HD

C.

QCIF, CIF, D1, HD

D.

QCIF, D1, CIF, HD

Buy Now
Questions 8

On a VSMS server, what is YaST used for?

Options:

A.

To check the status of the RAID storage

B.

To configure the network settings

C.

To monitor the network performance

D.

To troubleshoot video stream errors

Buy Now
Questions 9

Which four Cisco IP camera families natively support medianet? (Choose four.)

Options:

A.

Cisco 2900 Series IP Cameras

B.

Cisco 3000 Series IP Cameras

C.

Cisco 4000 Series IP Cameras

D.

Cisco 5000 Series IP Cameras

E.

Cisco 6000 Series IP Cameras

F.

Cisco 7000 Series IP Cameras

Buy Now
Questions 10

In a brand new Cisco VSM7 physical appliance, in which two instances should you need to use the Linux CLI? (Choose two.)

Options:

A.

Very rarely, or never

B.

Only when you need to upgrade the Cisco VSM server using RPM commands

C.

During initial setup of network settings

D.

Rarely; use YaST instead

E.

Only as needed when working with Cisco TAC

Buy Now
Questions 11

When troubleshooting camera issues, which technology allows you to find the IP address of a Cisco IP camera from the Cisco switch it is connected to?

Options:

A.

DHCP

B.

SNMP

C.

CDP

D.

medianet

Buy Now
Questions 12

When an installation of VSM is complete, what is the Cisco recommendation and best practice for the final step that should be taken?

Options:

A.

Create a configuration backup on the same server

B.

Create a backup in a location other than the server

C.

Delete any batch administration files left over from the installation

D.

Stop and restart each archive

Buy Now
Questions 13

You have been called to troubleshoot a network connectivity issue with a new Cisco VSM deployment. You are unable to ping the network gateway from the MSP server. Using the ifconfig command, you notice there are multiple network interfaces configured on the operating system. Which one of these network interfaces does the MSP server use in order to connect to the network gateway?

Options:

A.

LAN0

B.

NIC1

C.

Gigabit 0/1

D.

ETH0

Buy Now
Questions 14

Which three server platforms for Cisco Physical Security have built-in support for redundant power supplies? (Choose three.)

Options:

A.

Cisco UCS C-Series

B.

Cisco UCS B-Series

C.

Cisco UCS E-Series

D.

Cisco UCS Express / SRE 9xx

E.

Cisco CPS-MSP-2RU-K9

Buy Now
Questions 15

Which option lists the usable capacity on a Cisco MSP server from greatest to least?

Options:

A.

2RU (12 x 2TB), 2RU (6 x 2TB), 2RU (12 x 1TB), 2RU (6 x 1TB)

B.

2RU (12 x 2TB), 2RU (12 x 1TB), 2RU (6 x 2TB), 2RU (6 x 1TB)

C.

2RU (6 x 1TB), 2RU (6 x 2TB), 2RU (12 x 1TB), 2RU (12 x 2TB)

D.

2RU (6 x 1TB), 2RU (12 x 1TB), 2RU (6 x 2TB), 2RU (12 x 2TB)

Buy Now
Questions 16

Which statement best describes the application deployment model that Cisco recommends for scaling Cisco VSM 7?

Options:

A.

The recommended application deployment model is a co-located system because it greatly simplifies deployment and management.

B.

Cisco VSM 7 is flexible enough that applications can be added or removed on-the-fly without any down time.

C.

The recommended application deployment model is to have a dedicated Operations Manager server with additional, dedicated Cisco VSMS servers.

D.

Additional media servers can be added to co-located Cisco VSOM or Cisco VSMS systems to achieve identical scale and capabilities as standalone Cisco VSOM + standalone Cisco VSMS systems.

Buy Now
Questions 17

What is the approximate usable drive capacity for a CPS-MSP-2RU-K9 with half of the drive bays populated with 2 TB HDDs?

Options:

A.

4 TB

B.

8 TB

C.

10 TB

D.

20 TB

Buy Now
Questions 18

What is the correct camera and lens setup for the use of IR lighting?

Options:

A.

Color camera with IR corrected lens

B.

A camera with day/night mode and IR corrected lens

C.

A camera with day/night mode and varifocal lens

D.

Color camera with varifocal lens

Buy Now
Questions 19

Which of the following can affect the performance of the workstation that is used to display multiple panes of surveillance video?

Options:

A.

CPU and memory only

B.

Bus speed only

C.

Graphics card capabilities only

D.

CPU, memory, bus speed, and graphics card capabilities can affect workstation performance.

E.

CPU, memory, bus speed, and graphics card capabilities will not affect workstation performance.

Buy Now
Questions 20

Refer to the exhibit.

Which statement can be determined from the output shown?

Options:

A.

This is the output from the show power inline command.

B.

The connected device is an 802.af class 3 PoE camera.

C.

The switch management IP address is 10.10.10.202.

D.

The PoE device is connected to switch port 0.

Buy Now
Questions 21

In Cisco VSM 7.x, which tool allows the user to search through archives by focusing on a time slice of the video clip?

Options:

A.

Smart Search

B.

Archive Clip Search

C.

Thumbnail Search

D.

Forensic Search

Buy Now
Questions 22

Refer to the exhibit.

Cameras and a Cisco VSM server are connected to a Layer 2 switch. Which three steps will allow the Cisco VSM servers to see video traffic from the two IP cameras? (Choose three.)

Options:

A.

GigE 0/10 should be configured to accept traffic from all VLANs using the #switchport mode access vlan all command.

B.

GigE 0/10 should be configured to dynamic mode using the #switchport mode dynamic desirable command.

C.

Implement "router-on-a-stick".

D.

Implement inter-VLAN routing.

E.

The link between GigE 0/5 and FE 1/1 should be configured as a trunk port.

Buy Now
Questions 23

In addition to bandwidth, which factors should be considered when designing an IP network capable of delivering high-quality surveillance video in real time?

Options:

A.

minimize jitter and maximize latency

B.

minimize latency and maximize jitter

C.

minimize both jitter and latency

D.

maximize both jitter and latency

Buy Now
Questions 24

Which of the following reports are available in the Cisco Video Surveillance solution?

Options:

A.

User Configuration Report only

B.

Device Activity Report only

C.

Application History Report only

D.

User Configuration, Device Activity, and Application History reports are available in the Cisco Video Surveillance solution.

E.

User Configuration, Device Activity, and Application History reports are not available in the Cisco Video Surveillance solution.

Buy Now
Questions 25

Refer to the exhibit.

You are the system administrator for a newly deployed Cisco Video Surveillance solution. Which three methods allow for all of the Cisco IP cameras to be added to the Cisco VSM 7 system successfully? (Choose three.)

Options:

A.

Add each camera manually.

B.

Run Discover New Cameras (auto-discovery) for all networks shown.

C.

Medianet auto-configuration.

D.

Import cameras from file.

E.

Log into each camera and enter the Cisco VSOM server IP address into the web configuration interface of the camera.

F.

Set up a media server to the deployment to the 192.168.1.x network.

Buy Now
Questions 26

When adding a new IP camera to VSM 6.3.2, which of the following is not an option when selecting Role Rights?

Options:

A.

View

B.

Modify

C.

Manage

D.

None

Buy Now
Questions 27

Options:

Buy Now
Questions 28

A new VSMS server has been added to VSOM, but the storage capacity says "No Repositories." What should you do in order to resolve this?

Options:

A.

Restart VSOM

B.

Delete the newly added VSMS server from VSOM, and re-add the server

C.

The HDDs are faulty. Replace the HDDs in the newly added media server

D.

Configure the Local Repositories setting from the VSMC page of the newly added media server

Buy Now
Questions 29

How should the camera capacity for media servers be calculated?

Options:

A.

The CPS-MSP-1RU-K9 can handle up to 32 cameras. The CPS-MSP-2RU-K9 can handle up to 100 cameras.

B.

Camera capacity should be calculated by the available storage space on the media server

C.

Camera capacity should be calculated by the aggregate bit rate of all video streams, both inbound and outbound, on a media server

D.

Camera capacity cannot be calculated, and must be configured on site

Buy Now
Questions 30

What is the maximum number of internal encoder ports supported by the CPS-MSP-2RU-K9?

Options:

A.

16

B.

24

C.

32

D.

48

Buy Now
Questions 31

When adding a backup media server to VSOM, which of the following options is not correct?

Options:

A.

Backup media server can back up archives from multiple media servers

B.

Camera recordings can be selectively backed up

C.

Either full recording or events from the past 24 hours can be backed up on a daily basis

D.

Backups can be scheduled to occur in the future, for example, after one week or one month

Buy Now
Questions 32

Users are is complaining of an error message when they first log into VSOM. The message is red on a black background. What should be done?

Options:

A.

Their workstations are not powerful enough. Replace their workstations.

B.

This is not an error. A default view has not been selected.

C.

They are using an unsupported browser, and should switch to Internet Explorer.

D.

They are not using Microsoft Windows, and only Windows PCs are supported.

Buy Now
Questions 33

Which of the following Cisco products can natively pull video streams and camera hierarchy from the Cisco Video Surveillance system?

Options:

A.

Cisco Works

B.

Cisco Physical Access Manager

C.

Cisco Prime

D.

Cisco UCS Manager

Buy Now
Questions 34

Which Cisco IP Video Surveillance camera(s) allow for remote focus and zoom through the web interface of the camera?

Options:

A.

CIVS-IPC-2500 and CIVS-IPC-2600

B.

CIVS-IPC-2930

C.

CIVS-IPC-2621V

D.

CIVS-IPC-4500E

Buy Now
Questions 35

Refer to the exhibit.

Which statement can be determined from the output shown?

Options:

A.

This is the output from the show power inline command.

B.

The connected device is an 802.af class 2 PoE camera.

C.

The switch management IP address is 10.10.10.202.

D.

The PoE device is connected to switch port 7.

Buy Now
Questions 36

Which statement about virtualization support for Cisco VSM version 7.0.0 is true?

Options:

A.

Cisco VSM 7 can be installed on any hypervisor, such as VMware vSphere, Microsoft Hyper-V, and Citrix XenServer

B.

Cisco VSM 7 OVA can be deployed and ready to use right away, without additional configuration steps.

C.

When using internal storage of Cisco UCS C-Series server for storing media repositories, external storage (such as SAN arrays) cannot be used.

D.

Each Cisco UCS B- or C-Series server can run several instances of Cisco VSM VM at the same time, as long as the resources of the server are sufficient.

Buy Now
Questions 37

Which two statements about differences between HD or full HD and megapixel cameras are true? (Choose two.)

Options:

A.

Aspect ratio of full HD and megapixel cameras is the same.

B.

Resolution of full HD cameras is known, whereas megapixel cameras can vary.

C.

Megapixel cameras generally have higher frame rate than full HD cameras.

D.

Megapixel camera resolutions are common among different camera vendors.

E.

Megapixel cameras can have higher resolution than full HD cameras.

Buy Now
Questions 38

Where should outdoor surveillance cameras be mounted when nearby sources of light are present?

Options:

A.

The camera should be mounted lower than the light source.

B.

The camera should be mounted in parallel with the nearest light source.

C.

The camera should be mounted above the light source.

D.

Location does not matter, as long as the camera is day/night capable.

Buy Now
Questions 39

Where should outdoor surveillance cameras be mounted when sources of light are nearby?

Options:

A.

Cameras should be mounted lower than the light source.

B.

Cameras should be mounted in parallel with the nearest light source.

C.

Cameras should be mounted above the light source.

D.

Location does not matter, as long as the cameras are day/night capable.

Buy Now
Questions 40

What are the two differences between interlaced and progressive scan video? (Choose two.)

Options:

A.

Progressive scan video is generally better with fast-moving objects

B.

Interlaced video is generally better with fast-moving objects

C.

Interlaced video is constructed out of alternating odd and even lines

D.

Progressive scan video is constructed out of alternating odd and even lines

Buy Now
Questions 41

What is the advantage of using multicast instead of unicast to transport the camera video stream in the Cisco Video Surveillance solution?

Options:

A.

When the video stream is viewed on multiple operator workstations, the network is taxed only with single multicast stream.

B.

Multicast configuration on switching and routing infrastructure is less complex than the configuration for unicast traffic.

C.

You can configure one camera to stream to two media servers at the same time, for data redundancy purposes.

D.

Multicast is not supported in the Cisco Video Surveillance solution.

Buy Now
Questions 42

Per Cisco best practices, how should you bulk upgrade the firmware of the multiple Cisco IP cameras that are deployed in a Cisco VSM system?

Options:

A.

via the web interface of each camera only

B.

via Cisco VSOM - System Settings - System

C.

via Cisco VSMC - Maintenance - Server Upgrade

D.

via Cisco VSMC - Maintenance - Manage Drivers

Buy Now
Questions 43

Refer to the exhibit.

Cisco VSOM, Cisco VSMS servers, and IP cameras in the shown Cisco VSM deployment are utilizing default NTP behavior to ensure that time settings are synchronized across all devices. What is the IP address of the pointed-to NTP server for the device with IP address 172.168.1.101?

Options:

A.

10.0.0.10

B.

172.168.1.10

C.

172.168.1.101

D.

192.168.1.101

Buy Now
Questions 44

Refer to the exhibit.

You are the system administrator for a newly deployed Cisco Video Surveillance solution. Branch A cameras are streaming to Cisco VSMS-A and Branch B cameras are streaming to Cisco VSMS-B. Cisco VSOM is reporting a "Timed out waiting for server response" error when trying to load video from camera 192.168.1.102, but network pings are being responded to from your workstation at HQ. All other cameras from the 192.168.1.0 network are working as expected. Which three options could have caused the error message? (Choose three.)

Options:

A.

There is a network configuration issue with the switch and switch port that camera 192.168.1.102 is connected to.

B.

Media server 192.168.1.10 is down and not responding.

C.

The Branch A and HQ routers are updating their routing tables and they have not yet converged.

D.

There is an IP address conflict on the 192.168.1.0 network.

E.

The password on the camera was changed.

Buy Now
Questions 45

Which four camera configurations are valid? (Choose four.)

Options:

A.

CIVS-IPC-3530:1280x720 at 30 fps

B.

CIVS-IPC-3530:1280x800 at 30 fps

C.

CIVS-IPC-3530:1920x1080 at 5 fps

D.

CIVS-IPC-6030:1280x720 at 30 fps

E.

CIVS-IPC-6030:1280x800 at 30 fps

F.

CIVS-IPC-6030:1920x1080 at 15 fps

Buy Now
Exam Code: 648-238
Exam Name: Implementing Cisco Connected Physical Security 1
Last Update: Jul 26, 2024
Questions: 152
$68  $169.99
$52  $129.99
$44  $109.99
buy now 648-238