H12-893_V1.0 Sample Questions Answers

TheEasy modein Huawei’s iMaster NCE-Fabric simplifies network deployment for basic VXLAN fabrics. Let’s evaluate each statement:

A. This mode has low networking requirements:This is true. Easy mode is designed for simple topologies (e.g., small spine-leaf networks) with minimal configuration complexity.TRUE.

B. iMaster NCE-Fabric automatically generates configuration script files:This is true. Easy mode automates script generation based on user inputs, reducing manual effort.TRUE.

C. On iMaster NCE-Fabric, you need to manually create and configure fabric resource pools, managed devices, device groups, device roles, tenants, and VPCs one by one in the Configuration Wizard menu:This is false. Easy mode automates these tasks, minimizing manual configuration compared to advanced modes.FALSE.

D. Layer 2 and Layer 3 basic services in a VPC are orchestrated on the Easy page:This is true. Easy mode supports automated orchestration of L2 (e.g., BDs) and L3 (e.g., gateways) services within a VPC.TRUE.

Thus,A, B, and Dare true statements about Easy mode.References:Huawei CloudFabric Data Center Network Solution – iMaster NCE-Fabric Easy Mode; HCIP-Data Center Network Training – Deployment Modes.

In a hot standby scenario, firewalls (e.g., Huawei USG series) maintain high availability by synchronizing session tables between active and standby devices to ensure seamless failover. Let’s evaluate each protocol:

A. M-LAG (Multi-Chassis Link Aggregation):M-LAG is a link aggregation technology for switches, not designed for session table backup between firewalls.Incorrect.

B. VRRP (Virtual Router Redundancy Protocol):VRRP provides gateway redundancy by electing a master router, but it does not handle session table synchronization between firewalls.Incorrect.

C. BFD (Bidirectional Forwarding Detection):BFD is a fast failure detection protocolused with routing protocols, not for session table backup.Incorrect.

D. HRP (Hot Standby Redundancy Protocol):HRP is Huawei’s proprietary protocol specifically designed for firewall hot standby scenarios. It synchronizes session tables, configuration data, and status information between active and standby firewalls to ensure stateful failover.Correct.

Thus, the answer isD (HRP).References:Huawei Firewall Configuration Guide – Hot Standby; HCIP-Data Center Network Training – Firewall Redundancy.

Huawei’s CloudFabric solution provides an SDN-based framework for data center network management, supporting automation across the network lifecycle. Let’s evaluate each phase:

A. Planning and construction:This is true. CloudFabric automates network design, resource allocation, and deployment during the planning and construction phase using tools like iMaster NCE.TRUE.

B. Service provisioning:This is true. Automated service orchestration (e.g., VXLAN tunnel setup, tenant configuration) is a key feature during provisioning.TRUE.

C. O&M and monitoring:This is true. CloudFabric offers real-time monitoring, fault detection, and performance optimization through centralized management.TRUE.

D. Change optimization:This is true. The solution supports automated upgrades, policyadjustments, and optimization based on analytics, covering the change management phase.TRUE.

All phasesA, B, C, and Dare supported by CloudFabric’s full-lifecycle automation.References:Huawei CloudFabric Data Center Network Solution – Automation Features; HCIP-Data Center Network Training – Lifecycle Management.

FusionCompute is Huawei’s virtualization platform, part of the FusionSphere ecosystem, designed for managing virtualized resources in data centers. Its logical architecture consists of two primary modules:

VRM (Virtualization Resource Management):VRM is the management module responsible for centralized control, resource allocation, and monitoring of virtual machines, hosts, and clusters. It provides the user interface and orchestration capabilities for administrators to manage the virtualized environment.

CNA (Compute Node Agent):CNA runs on physical hosts and handles the execution of virtualization tasks, such as VM creation, resource scheduling, and communication with the underlying hypervisor (typically KVM in Huawei’s implementation). It acts as the compute node agent interfacing with the hardware.

Together, VRM and CNA form the core logical architecture of FusionCompute, with VRM managing the environment and CNA executing the compute tasks. The answer, per Huawei’s documentation, isVRM.References:Huawei FusionCompute Product Documentation – Architecture Overview; HCIP-Data Center Network Training – FusionCompute Section.

Link aggregation, often implemented using Link Aggregation Control Protocol (LACP) on Huawei CloudEngine (CE) series switches, combines multiple physical links into a single logical link to enhance network performance and resilience. The primary advantages include:

Load Balancing Supported (B):Link aggregation distributes traffic across multiple links based on hashing algorithms (e.g., source/destination IP or MAC), improving load distribution and preventing any single link from becoming a bottleneck.

Increased Bandwidth (C):By aggregating multiple links (e.g., 1 Gbps ports into a 4 Gbps logical link), the total available bandwidth increases proportionally to the number of links.

Improved Reliability (D):If one link fails, traffic is automatically redistributed to the remaining links, ensuring continuous connectivity and high availability.

However,Improved Forwarding Performance of Switches (A)is not a direct advantage. Forwarding performance relates to the switch’s internal packet processing capabilities (e.g., ASIC performance, forwarding table size), which link aggregation does not inherently enhance. While it optimizes link utilization, it doesn’t improve the switch’s intrinsic forwarding rate or reduce latency at the hardware level. This aligns with Huawei’s CE series switch documentation, where link aggregation is described as enhancing bandwidth and reliability, not the switch’s core forwarding engine.References:Huawei CloudEngine Series Switch Configuration Guide – Link Aggregation Section.

Huawei’s iMaster NCE-Fabric is an SDN controller for the CloudFabric Solution, providing network orchestration and management. It includes built-in servers to support its operations. Let’s evaluate each option:

A. DNS server:This is false. iMaster NCE-Fabric does not include a built-in DNS server; it relies on external DNS services for name resolution, configured during deployment.FALSE.

B. RADIUS authentication server:This is false. RADIUS authentication is typically handled by external AAA servers; iMaster NCE-Fabric integrates with them but does not embed a RADIUS server.FALSE.

C. DHCP server:This is true. iMaster NCE-Fabric includes a built-in DHCP server to assign temporary IP addresses during Zero Touch Provisioning (ZTP) or initial device configuration.TRUE.

D. Version file server:This is true. A version file server is built into iMaster NCE-Fabric to store and deliver software images or configuration files for device upgrades and management.TRUE.

Thus,C (DHCP server) and D (Version file server)are built into iMaster NCE-Fabric.References:Huawei CloudFabric Data Center Network Solution – iMaster NCE-Fabric Features; HCIP-Data Center Network Training – Controller Services.

BGP EVPN (Ethernet VPN) extends BGP to provide control plane functionality for VXLAN overlays, including in Huawei’s data center networks. EVPN defines several route types to advertise different types of information:

Type 1:Auto-discovery routes for EVPN instances.

Type 2:MAC/IP Advertisement routes for host reachability.

Type 3:Inclusive Multicast Ethernet Tag routes for multicast traffic.

Type 4:Ethernet Segment routes for multi-homing.

Type 5:IP Prefix routes for advertising host IP routes and external network routes, enabling inter-subnet and external connectivity.

The question specifies routes used to advertise "host IP routes and external network routes," which aligns withType 5routes. These routes carry IP prefix information and a Layer 3 VNI, facilitating Layer 3 routing within the EVPN domain or to external networks. Thus, the answer is5.References:Huawei HCIP-Data Center Network Training – BGP EVPN Routes; CloudFabric EVPN Configuration Guide.

In Huawei’s spine-leaf VXLAN fabric (e.g., CloudFabric), nodes have specific roles:

A. DCI leaf:Data Center Interconnect (DCI) leaf nodes connect different data centers, not internal computing resources.Incorrect.

B. Server leaf:Server leaf nodes connect computing resources (virtual servers via hypervisors, physical servers) to the VXLAN fabric, handling access traffic. This is the correct role for connecting servers.Correct.

C. Border leaf:Border leaf nodes connect the DCN to external networks, not internal computing resources.Incorrect.

D. Service leaf:Service leaf nodes connect to value-added services (e.g., firewalls), not directly to computing resources like servers.Incorrect.

Thus, the answer isB (Server leaf).References:Huawei CloudFabric Data Center Network Solution – Spine-Leaf Architecture; HCIP-Data Center Network Training – Node Roles.

In Huawei’s M-LAG (Multi-Chassis Link Aggregation) on CE series switches, the two member devices synchronize critical information over the peer-link to ensure seamless operation and failover. Let’s evaluate each option:

A. ACL information:Access Control List (ACL) configurations are typically not synchronized in M-LAG, as they are device-specific security policies. Synchronization of ACLs is not a standard feature in Huawei’s M-LAG implementation.NOT SYNCHRONIZED.

B. STP status:Spanning Tree Protocol (STP) status (e.g., port roles, states) is synchronized to maintain a consistent loop-free topology across M-LAG peers, especially when V-STP or other STP variants are used.SYNCHRONIZED.

C. Device name:Device names are administrative identifiers and are not synchronized, as they do not impact traffic forwarding or M-LAG functionality.NOT SYNCHRONIZED.

D. LACP information:Link Aggregation Control Protocol (LACP) status (e.g., link states, aggregation details) is synchronized to ensure both M-LAG devices present a unified LAG to downstream devices, supporting load balancing and failover.SYNCHRONIZED.

Thus,B (STP status) and D (LACP information)are synchronized between M-LAG devices.References:Huawei CloudEngine Series Switch Configuration Guide – M-LAG Synchronization; HCIP-Data Center Network Training – M-LAG Operation.

EVPN (Ethernet VPN) is a control plane technology used with VXLAN to provide Layer 2 and Layer 3 services in data center networks, including Huawei’s implementations. EVPN routes are categorized into types, with Type 5 routes (IP Prefix routes) serving a specific purpose:

Type 5 Routes:These routes advertise IP prefixes and are used for inter-subnet routing, allowing communication between different VXLAN Virtual Network Identifiers (VNIs) or between VXLAN networks and external networks. They carry a Layer 3 VNI and IP prefix information, enabling routers or gateways to perform Layer 3 forwarding.

Usage Scope:Type 5 routes are not limited to hosts on a VXLAN network accessing external networks. They are also used by network devices (e.g., gateways, routers) within the EVPN domain to facilitate routing between subnets, including intra-VXLANcommunication. For example, a centralized gateway or distributed gateway can use Type 5 routes to route traffic within the data center or to external networks, not just host-initiated access.

The statement isFALSE (B)because Type 5 routes are not exclusively for hosts on a VXLAN network to access external networks; they support broader Layer 3 routing functions across the EVPN domain.References:Huawei HCIP-Data Center Network Training – EVPN Routing; CloudFabric EVPN Configuration Guide.

To identify the false statement, we evaluate each option based on standard M-LAG documentation, such as Huawei’s and Arista’s guidelines, which are commonly referenced in HCIP-Data Center Network training.

Option A: In loose mode, if Type 1 configurations of the two M-LAG member devices are inconsistent, the member interface on the M-LAG backup device is in Error-Down state and an alarm is generated, indicating that Type 1 configurations on the two devices are inconsistent.

Evaluation: This statement is true. In loose mode, inconsistencies in Type 1 (key) configurations are still critical, as they can affect M-LAG operation. According toHuawei M-LAG Configuration Guide, when Type 1 configurations are inconsistent in loose mode, the system may place the member interface on the backup device into an Error-Down state and generate an alarm to alert administrators. This ensures that critical issues are flagged, even in loose mode, to prevent loops or packet loss.

Conclusion: True.

Option B: If Type 1 configurations of the two M-LAG member devices are inconsistent, certain problems may occur, such as loops and long-period packet loss when the status is normal.

Evaluation: This statement is true. Type 1 configurations are essential for M-LAG operation, and inconsistencies can lead to severe network issues. For example, mismatched LACP settings or VLAN mappings can create loops or cause packet loss, as noted inArista M-LAG Documentation. These problems can persist even when the system appears normal, making consistency checks critical for troubleshooting and O&M.

Conclusion: True.

Option C: If Type 2 configurations of the two M-LAG member devices are inconsistent, the M-LAG running status may be abnormal. Compared with Type 1 configuration problems, Type 2 configuration problems are more likely to be detected and have less impact on the network.

Evaluation: This statement is true. Type 2 (common) configurations, such as QoS or STP settings, are less critical but can still affect network performance. According toHuawei M-LAG Best Practices, Type 2 inconsistencies are often detected during consistency checks but have a lower impact on M-LAG operation compared to Type 1 issues. They are also more likely to be flagged during monitoring, as they are less severe and easier to resolve.

Conclusion: True.

Option D: If Type 2 configurations of the two M-LAG member devices are inconsistent, an alarm that indicates key and common configuration inconsistencies is generated.

Evaluation: This statement is false. While Type 2 (common) configuration inconsistencies are detected during consistency checks, they do not typically triggeralarms, especially alarms that specifically indicate both key and common configuration inconsistencies. According toHuawei M-LAG Configuration GuideandArista M-LAG Documentation, Type 2 inconsistencies may be logged or reported in system logs but are not severe enough to generate critical alarms unless they significantly impact network operation. Alarms are more commonly associated with Type 1 (key) configuration inconsistencies, as they pose a higher risk to M-LAG functionality.

Conclusion: False.

In Huawei’s spine-leaf data center network (DCN) architecture, the topology consists of spine nodes (core) and leaf nodes (access/aggregation). Leaf nodes can serve different roles:

Border Leaf Node:Connects the DCN to external networks or other domains, handling Layer 3 routing.

Service Leaf Node:Connects to internal services (e.g., servers, VMs), often handling Layer 2/Layer 3 traffic.

In practice, a single physical device can be configured to perform both roles (border and service) if it has the necessary interfaces and routing capabilities. Huawei’s CloudFabric documentation supports this flexibility, allowing a leaf switch to act as both a border and service node based on configuration (e.g., using VRFs or VXLAN gateways). This reduces hardware costs and simplifies deployment in smaller DCNs.

The statement isTRUE (A)because the border leaf and service leaf roles can be deployed on the same device in a spine-leaf architecture.References:Huawei CloudFabric Data Center Network Solution – Spine-Leaf Design; HCIP-Data Center Network Training – Leaf Node Roles.

V-STP (Virtual Spanning Tree Protocol) is a Huawei-specific enhancement of the Spanning Tree Protocol (STP) designed to prevent Layer 2 loops in complex network topologies, including Multi-Chassis Link Aggregation (M-LAG) deployments on Huawei CloudEngine (CE) series switches.

M-LAG Overview:M-LAG allows two switches to appear as a single logical device, connecting to downstream devices via Link Aggregation Groups (LAGs). Without proper loop prevention, incorrect configurations (e.g., misconfigured ports) or physical connections (e.g., redundant links) can cause broadcast storms.

V-STP Role:V-STP extends STP to handle virtualized environments and M-LAG scenarios. It ensures that only one path is active in a loop-prone topology by blocking redundant links, preventing loops caused by misconfigurations or unintended connections. In M-LAG, V-STP coordinates with the peer-link to maintain a loop-free topology.

The statement isTRUE (A)because V-STP is designed to prevent loops in M-LAG deployments due to incorrect configurations or connections.References:Huawei CloudEngine Series Switch Configuration Guide – V-STP and M-LAG; HCIP-Data Center Network Training – Loop Prevention.

Huawei’s CloudFabric Solution supports various data center scenarios. Let’s evaluate each option:

A. Container network:This is true. CloudFabric supports containerized environments (e.g., Kubernetes) with VXLAN and SDN integration.TRUE.

B. OpenFlow network:This is false. CloudFabric primarily uses BGP-EVPN and proprietary protocols, not OpenFlow, which is more associated with other SDN platforms.FALSE.

C. Hosting:This is true. CloudFabric is suitable for hosting environments, providing multi-tenant network services.TRUE.

D. Cloud-network integration:This is true. It integrates with cloud platforms (e.g., OpenStack) for unified management.TRUE.

E. Computing:This is false. While it supports computing resources, “computing” is not a primary scenario; it’s an enabler (e.g., server connectivity).FALSE.

Thus,A, C, and Dare application scenarios.References:Huawei CloudFabric Data Center Network Solution – Use Cases; HCIP-Data Center Network Training – Application Scenarios.

Zero Touch Provisioning (ZTP) in Huawei’s CloudFabric automates device setup using DHCP. Let’s evaluate each option:

A. Default gateway address:This is true. DHCP can deliver the default gateway address to configure routing for the device.TRUE.

B. SFTP server address:This is false. SFTP server addresses are not standard DHCP options; they may be configured manually or via other protocols (e.g., TFTP for boot files).FALSE.

C. DNS server address:This is true. DHCP can provide DNS server addresses (Option 6) for name resolution during ZTP.TRUE.

D. Temporary management IP address:This is true. DHCP assigns temporary IPs (e.g., Option 50) for management during initial provisioning in ZTP.TRUE.

Thus,A, C, and Dcan be delivered by a DHCP server in ZTP.References:Huawei CloudFabric Data Center Network Solution – ZTP Configuration; HCIP-Data Center Network Training – ZTP Process.