220-1201 Sample Questions Answers

An A record maps a domain name to an IPv4 address in a DNS server.

From CompTIA A+ 220-1101 Official Study Guide, Objective 2.6 – DNS records:

“A records map hostnames to IPv4 addresses, while AAAA records map to IPv6 addresses.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 2: DNS Records

CompTIA Exam Objectives 220-1101, Domain 2.6

============

Mobile Device Management (MDM) enables administrators to enforce controls on enterprise devices, such as restricting apps, ensuring compliance, and remotely managing security policies.

Why Not B (MFA): Multi-Factor Authentication secures user access but does not control device configurations.

Why Not C (VPN): VPN secures communication but does not enforce device controls.

Why Not D (SSL): SSL secures data in transit but does not provide device management.

CompTIA A+ Exam Reference: Core 2 (220-1102), Section 2.7, device management concepts​.

2.4GHz Wi-Fi signals have better penetration through walls and other obstacles compared to 5GHz and 6GHz. Lower frequency waves (like 2.4GHz) travel farther and are less absorbed by physical barriers.

From the CompTIA A+ 220-1101 Official Study Guide, Objective 2.5 – Compare and contrast wireless networking protocols:

“The 2.4GHz frequency band offers greater range and better penetration through walls and obstacles than higher frequencies like 5GHz and 6GHz. Higher frequencies provide faster speeds but are more easily absorbed by walls.”

NFC (Near Field Communication) is not a Wi-Fi technology and works only over very short distances (a few centimeters).

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 2: Wireless Networking

CompTIA Exam Objectives 220-1101, Domain 2.5

============

For a device to communicate on a network, it must have a valid IP address, subnet mask, and default gateway configured.

From CompTIA A+ 220-1101 Official Study Guide, Objective 2.2 – Network configuration:

“A valid IP address, subnet mask, and gateway are required for network connectivity and communication outside the local network.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 2: Network Configuration

CompTIA Exam Objectives 220-1101, Domain 2.2

============

NFC (Near-Field Communication) is a subset of RFID technology designed for very short-range wireless communication, typically within a few centimeters. It is primarily used for contactless transactions, like mobile payments, and can also support peer-to-peer data exchanges. NFC operates at 13.56 MHz and enables devices to communicate when placed near each other.

Port 3389 is used by the Remote Desktop Protocol (RDP) for remote desktop connections in Windows environments. This port allows remote control and management of systems across the network.

Excessive heat buildup due to insufficient cooling is a primary cause of unexpected shutdowns. A high-performance heat sink improves thermal transfer, dissipates more heat, and helps maintain CPU temperature within safe limits. When CPU temperatures reach levels like 208°F (98°C), the system may shut down to prevent damage.

C. Installing redundant PSUs (Power Supply Units):

Redundant PSUs provide fault tolerance by ensuring that if one power supply fails, another will take over seamlessly.

This is a cost-effective way to increase uptime while waiting for the UPSs to arrive.

Incorrect Options:

A. Purchasing backup generators: Generators are costly and are typically used for long-term outages, not as an immediate or cost-effective solution.

B. Increasing input voltage: This is not a practical solution to hardware failures or power issues.

D. Activating a hot site: A hot site is an expensive, fully operational backup facility that would not be a cost-effective solution for this scenario.

Key Takeaway: Installing redundant PSUs is a cost-effective way to balance uptime requirements in case of power or hardware failure.

Plenum cabling is designed for use in commercial spaces where cables run through air ducts or plenum spaces, as it has fire-resistant properties and emits less toxic smoke.

Why Not A (USB 3.1 Gen 2): USB is for peripheral connections, not large-scale commercial installations.

Why Not B (Straight tip fiber connector): Fiber connectors are for high-speed connections but are not specifically for commercial spaces.

Why Not D (Cat 8): While Cat 8 is high-speed, it is not uniquely suited for commercial spaces like plenum cabling.

CompTIA A+ Exam Reference: Core 1 (220-1201), Section 3.1, cabling standards​.

If performance isnot a primary concernand the user requireslarge, cost-effective storage, a2TB 5400rpm SATA HDDis ideal. It offers high capacity at a lower price point than SSDs and faster HDDs.

Option A:NVMe drives offer exceptional speed but are significantly more expensive per GB and not necessary when read/write speed is not a concern.

Option B:RAID 1 improves redundancy but cuts usable capacity in half and uses expensive SSDs.

Option D:SAS drives are fast and reliable but are enterprise-grade and expensive — overkill for desktop use.

CompTIA A+ Core 1 Exam Objective Reference:

Objective 1.3: Given a scenario, install and configure storage devices.

A sandbox is a secure, isolated environment used to test potentially harmful software or code. It prevents the software from affecting the main system, allowing safe malware testing. Thismethod is standard in cybersecurity best practices.

The most likely cause isthird-party or ill-fitting casesobstructing the contact between the stylus and the tablet charging mechanism. Some cases may not be designed with stylus charging in mind, particularly if users are purchasing their own accessories.

Option B:A software update might fix OS-related issues, but would not typically affect physical charging.

Option C:If some devices had defects, the issue would likely be consistent, not isolated to some users.

Option D:Firmware issues could be a factor but are less likely than physical obstructions when users are using different accessories.

CompTIA A+ Core 1 Exam Objective Reference:

Objective 1.4: Given a scenario, configure settings and use cases for laptops and mobile devices.

A managed switch provides advanced features such as traffic monitoring and VLAN configuration, allowing a technician to view network statistics for devices on the local subnet.

Why Not B (Router): A router connects different networks and directs traffic between them but does not provide detailed subnet-level statistics.

Why Not C (Access point): Access points provide wireless connectivity but lack traffic monitoring features.

Why Not D (Firewall): A firewall filters traffic but is not used for monitoring detailed statistics on a local subnet.

CompTIA A+ Exam Reference: Core 1 (220-1201), Section 2.6, network monitoring tools​.

Physical damage from dropping a tablet may often affect ports or connectors. Before taking deeper diagnostic or replacement steps, it's important to visually inspect the USB-C charging port for damage or debris. If the port is damaged, charging issues can occur regardless of battery health.

Syslog is used to log system events and tasks performed by applications, providing a centralized record of activity.

Why Not A (Fileshare): Fileshares store files but are not designed for event logging.

Why Not C (Database): Databases can store logs but are not a logging mechanism themselves.

Why Not D (SAN): A SAN is a storage solution, not a logging tool.

CompTIA A+ Exam Reference: Core 1 (220-1201), Section 2.6, system monitoring and logging​.

The 12VHPWR connector can supply up to 600 watts of power, designed for high-end graphics cards.

Why Not A (400W): This is less than the connector’s maximum capability.

Why Not B (MOW): This is an invalid option.

Why Not D (700W): The maximum supported power is 600W.

CompTIA A+ Exam Reference: Core 1 (220-1201), Section 3.4, power supply and connectors​.

Comprehensive and Detailed Step-by-Step Explanation:

To answer this question, we need to identify the port numbers associated with email protocols used in client-server communication.

Port 25 (SMTP - Simple Mail Transfer Protocol):

This port is primarily used for sending emails between mail servers and from mail clients to mail servers (sending outbound mail).

SMTP is an essential protocol for email traffic.

Atoner probe(also known as a tone generator and probe) is the best tool fortracing and identifying cablesin a patch panel or wall jack. The tone generator sends a signal through the wire, and the probe helps locate the cable by detecting the tone.

Option A (Crimper):Used to attach connectors (e.g., RJ-45), not for tracing cables.

Option B (Punchdown tool):Used to terminate cables into patch panels or keystone jacks.

Option C (Cable stripper):Used to remove insulation, not to trace cables.

CompTIA A+ Core 1 Exam Objective Reference:

Objective 5.1: Identify basic cable types, their connectors, and their features.

A smart card provides an additional factor of authentication by storing secure credentials, such as certificates, that cannot be guessed or replicated. It complements user accounts and is "something you have".

Why Not A (Fingerprint reader): This is "something you are", but the scenario specifically requires a physical token.

Why Not C (Secure token): Secure tokens are also valid but may not integrate as seamlessly into multi-factor authentication for physical and system access.

Why Not D (NFC scanner): An NFC scanner is a device and not a token itself; it reads cards or other credentials.

CompTIA A+ Exam Reference: Core 2 (220-1102), Section 2.5, access controls​.

Reasoning: A cable tester capable of testing Power over Ethernet (PoE) functionality can verify whether the switchport is providing the required power to the phone. This tool measures both the presence of data and the voltage or wattage being provided through the Ethernet cable.

This is the most effective way to confirm that PoE is available on the port.

Why the Other Options Are Incorrect:

A. Network tap:

A network tap is primarily used to monitor network traffic, not to test for PoE availability. It cannot verify if power is being supplied through the Ethernet cable.

C. Loopback plug:

A loopback plug is used to test the functionality of a network port by creating a loop for transmitted and received signals. It does not measure or verify PoE availability.

D. Toner probe:

A toner probe is used for tracing and identifying network cables. It cannot test for PoE functionality.

Practical Example:

A PoE phone might not turn on due to a misconfigured or faulty switchport. Using a cable tester capable of measuring PoE would help the technician determine if the switchport is supplying sufficient power to the phone.

CompTIA A+ Exam Objective Alignment:

Objective 2.1: Identify common networking hardware and tools, including PoE-enabled devices and cable testers.

A. Check the product manual for the procedure:

When hardware is not easily accessible, always consult the product manual for proper disassembly procedures. Forcing the cover can damage the laptop or void the warranty.

Product manuals often provide step-by-step instructions for safely accessing internal components.

Incorrect Options:

B. Use a pry tool to force the cover open: Forcing the cover can cause physical damage to the device.

C. Insert the wireless card into the M.2 slot: This step cannot be performed until the cover is properly removed.

D. Try to move the cover by sliding it in all directions: Randomly sliding the cover can cause damage if the correct removal method is not followed.

Key Takeaway: Always refer to the product manual to ensure safe and proper disassembly of laptop components.

BitLocker Drive Encryption in Windows requires aTrusted Platform Module (TPM)to encrypt the boot drive securely. The TPM is a dedicated microcontroller designed to secure hardware through integrated cryptographic keys. It validates system integrity during boot and securely stores the encryption keys. If BitLocker cannot find a TPM or it is disabled in BIOS/UEFI, drive encryption cannot proceed.

BitLocker can function without TPM using a USB startup key, but this compromises some security and is not recommended for managed enterprise environments.

Bluetooth networks connect devices like smartphones, headphones, or mice over short distances, forming a Personal Area Network (PAN). These are designed for small-scale communication around the user.

Comprehensive and Detailed Step-by-Step Explanation:

When delivering 10Gbps speeds over long distances, fiber optic cables are the best choice. Here’s the breakdown:

A. Multimode Fiber (Correct Answer):

Multimode fiber is designed for relatively short to medium distances (up to 1,312 feet or 400 meters) while supporting high-speed data transfer (10Gbps and above).

It uses LED light sources and is cost-effective for environments like data centers or within buildings.

For the specified distance of over 328ft but under 1,312ft, multimode fiber is the most suitable option.

Incorrect Options:

B. Single-mode Fiber: While single-mode fiber supports much greater distances (up to several miles or kilometers) and higher speeds, it is more expensive and unnecessary for the specified range. Single-mode fiber is generally used for long-haul networking or telecommunications.

C. Cat 6a: Cat 6a is capable of 10Gbps speeds but only up to 328ft (100 meters). It cannot reliably handle the specified distance of over 328ft.

D. Cat 6: Cat 6 is also limited to 10Gbps speeds at distances up to 328ft (100 meters). Beyond this range, it is unsuitable.

Key Takeaway:

For delivering 10Gbps speeds over distances longer than 328ft (100m) but under 1,312ft (400m), Multimode Fiber is the best choice due to its ability to support high-speed data over medium distances at a reasonable cost.

A port replicator is designed to allow a user to quickly connect a laptop to multiple peripherals (display, keyboard, mouse, network, etc.) using a single interface, reducing setup time.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.1 – Laptop hardware and connections:

“Port replicators offer quick connections for multiple peripherals, streamlining the process of docking and undocking a laptop.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Laptop Hardware

CompTIA Exam Objectives 220-1101, Domain 3.1

Elasticity in cloud computing refers to the ability of a system to automatically allocate and release resources (such as CPU, RAM, or virtual machines) as workload demands change. This feature is key to ensuring that resources are used efficiently without manual intervention.

If users canaccess local network resourcesbut not theinternet, the most likely culprit is amisconfigured or missing default gateway. The default gateway routes traffic from the local network to external networks (i.e., the internet). If it’s not properly set or was altered during a firewall update, internet traffic won’t be forwarded correctly.

Option A:Static IPs could cause conflict, but wouldn't affect only external access if configured correctly.

Option C:An incorrect subnet mask could isolate devices, but local communication would likely be impacted too.

Option D:VLANs segment networks; while misconfigured VLANs could cause access issues, they’d more likely isolate local traffic as well.

CompTIA A+ Core 1 Exam Objective Reference:

Objective 2.6: Given a scenario, configure and troubleshoot network connectivity.

SAS (Serial Attached SCSI) is a high-performance drive interface commonly found in enterprise environments and servers due to its reliability and speed. While SATA is more common in consumer systems, SAS is specifically designed for mission-critical applications, offering features like full-duplex operation and compatibility with SATA drives.

An eSIM (embedded SIM) allows users to change carriers and provision new cellular service without installing any physical hardware. It is managed via software and is ideal for international travelers who need to switch providers quickly.

From the CompTIA A+ 220-1101 Official Study Guide, Objective 3.3 – Install and configure mobile device network connectivity:

"eSIMs provide carrier flexibility by enabling remote provisioning and profile switching, making it possible to connect to different networks without a physical SIM card."

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Mobile Devices

CompTIA Exam Objectives 220-1101, Domain 3.3

If only one print job fails and others succeed, it is often due to a paper type or tray selection mismatch for that specific job. If a print job is configured to use a tray that is empty or set to manual feed, it will not be released until resolved.

From CompTIA A+ 220-1101 Official Study Guide, Objective 4.3 – Printer troubleshooting:

“If a specific print job stalls while others succeed, check the job settings for specific tray or paper type configurations that do not match the printer’s current setup.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 4: Printer Troubleshooting

CompTIA Exam Objectives 220-1101, Domain 4.3

============

The Trusted Platform Module (TPM) is a hardware-based security feature used to store cryptographic keys, such as those used for encryption, authentication, or device identification. It plays a critical role in ensuring secure operations for encrypted drives, BitLocker, and secure boot processes. Clearing TPM keys involves wiping all stored cryptographic data, which can lead to several consequences depending on what the TPM was being used for. Let’s break it down:

Correct Answer: A. Encrypted hard drives would probably not be accessible.

Encrypted hard drives, such as those secured with BitLocker encryption, rely on the cryptographic keys stored in the TPM to unlock data.

Clearing the TPM will erase these keys, making it impossible for the encrypted drive to decrypt its contents unless a recovery key (separate from the TPM) is available. Without this recovery key, the data will likely become inaccessible.

CompTIA A+ Core 1 Exam Objective Reference: This falls under Objective 3.5, which covers understanding BIOS/UEFI configurations, TPM functions, and securing devices.

Why the Other Options Are Incorrect:

B. All security certificates would need to be reinstalled from trusted roots.

Clearing the TPM does not erase security certificates stored in the operating system or other areas. Certificates are generally managed by the OS or specific applications, not the TPM.Clearing the TPM only affects cryptographic keys and data stored in the TPM chip, so this is incorrect.

C. The device would need to be reenrolled in the MDM platform.

Mobile Device Management (MDM) enrollment typically does not rely on the TPM. While certain enterprise security configurations may involve the TPM, clearing it does not inherently trigger MDM reenrollment unless specifically tied to the MDM configuration.

D. The laptop would need to be registered to the domain as a new client.

While domain registrations may sometimes use TPM for authentication or secure operations, clearing the TPM alone does not require re-registering the device to the domain. The domain registration and authentication process rely more on system-level credentials than the TPM itself.

Practical Example:

A user enables BitLocker on their laptop, which relies on the TPM to store the encryption key. Later, if they clear the TPM via BIOS/UEFI without saving the BitLocker recovery key separately, they will not be able to unlock the hard drive, leading to data loss unless the recovery key is available. This is a common issue when technicians or users inadvertently clear the TPM without understanding its role in encryption.

CompTIA A+ Exam Objective Alignment:

Objective 3.5: Given a scenario, install and configure laptop hardware and components, including UEFI/BIOS security settings (TPM, secure boot, etc.).

This question tests understanding of TPM functionality, encryption technologies, and secure device configurations.

After determining the issue is likely on the remote server, the technician should test the theory to confirm the root cause before proceeding.

Why Not A (Document the findings): Documentation comes after confirming the issue.

Why Not C (Gather information): Information gathering is already completed.

Why Not D (Establish a plan of action): This is done after confirming the issue.

CompTIA A+ Exam Reference: Core 2 (220-1102), Section 3.1, troubleshooting methodology​.

Cellular networks offer broad coverage in rural or less populated areas where laying fiber, cable, or DSL lines may not be feasible or cost-effective. Cellular broadband (4G LTE/5G) provides fast speeds using existing mobile network infrastructure.

From CompTIA A+ 220-1101 Official Study Guide, Objective 2.7 – Compare and contrast Internet connection types:

"Cellular connections offer high speed and extensive coverage, especially in areas where other wired infrastructure may not exist or be practical."

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 2: Internet Connections

CompTIA Exam Objectives 220-1101, Domain 2.7

============

RG11 coaxial cable with quad shielding is designed to handle large volumes of internet traffic, providing excellent resistance to interference and high bandwidth capacity.

Why Not A (USB 3.1): USB 3.1 is used for connecting peripherals, not for high-volume internet traffic.

Why Not C (SATA3.0): SATA is used for internal data storage connections, not for network traffic.

Why Not D (Unshielded plenum RJ45): While RJ45 cables are commonly used, unshielded cables are prone to interference and are not ideal for high-volume traffic.

CompTIA A+ Exam Reference: Core 1 (220-1201), Section 3.1, cable types and their characteristics​.

When a device shows asnot connectedeven though it previously paired, the most effective action is tore-pair the devices. This resets the Bluetooth connection, clears any corruption in pairing profiles, and re-establishes communication.

Option A:Entering a PIN is only relevant during initial pairing and may not be prompted again.

Option B:Turning off Wi-Fi doesn’t typically affect Bluetooth; they operate on similar frequencies but don’t conflict this way in normal use.

Option D:If Bluetooth were disabled, the device wouldn’t appear at all, not just show as “not connected.”

CompTIA A+ Core 1 Exam Objective Reference:

Objective 1.5: Given a scenario, connect and configure accessories and ports of mobile devices.

Large electrical motors can emit electromagnetic interference (EMI), which can disrupt wireless signals and prevent connectivity.

From CompTIA A+ 220-1101 Official Study Guide, Objective 2.4 – Wireless troubleshooting:

“Sources of external interference such as motors or other electrical equipment can disrupt wireless network connectivity.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 2: Networking Troubleshooting

CompTIA Exam Objectives 220-1101, Domain 2.4

============

NVMe (Non-Volatile Memory Express) drives commonly use the M.2 interface and provide the highest performance for SSDs.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.2 – Storage devices:

“NVMe drives connect via the M.2 slot and provide the fastest data transfer rates available for storage devices.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Storage Technologies

CompTIA Exam Objectives 220-1101, Domain 3.2

RAID 0 (striping) provides the fastest read (and write) speeds at the lowest cost, as all disk capacity is used for storage and performance. However, it offers no redundancy.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.4 – RAID types:

"RAID 0 stripes data across multiple disks, offering the best performance and lowest cost but no fault tolerance."

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: RAID Levels

CompTIA Exam Objectives 220-1101, Domain 3.4

Unmanaged switches require no configuration—they simply need to be plugged in and start working immediately, making them ideal for simple network setups.

Managed switches provide advanced features such as VLANs, SNMP monitoring, port security, and traffic management, but require configuration.

From CompTIA A+ 220-1101 Official Study Guide, Objective 2.2 – Compare and contrast common networking hardware:

“Unmanaged switches operate out of the box with no configuration and are designed for simple connectivity. Managed switches allow for configuration, monitoring, and management of network traffic and security.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 2: Networking Hardware

CompTIA Exam Objectives 220-1101, Domain 2.2

============

To boot from a USB drive, the user must configure the boot order in the system BIOS/UEFI to prioritize the USB device. This setting tells the computer to load the operating system from the USB device on startup.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.5 – Configure BIOS/UEFI settings:

“The boot order determines the sequence in which the system firmware attempts to find an OS to boot. Setting USB as the first boot device allows the computer to boot from a USB drive.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: BIOS/UEFI Configuration

CompTIA Exam Objectives 220-1101, Domain 3.5

============

PCIe (Peripheral Component Interconnect Express) is required for high-end video cards.

NVMe (Non-Volatile Memory Express) utilizes the M.2 or PCIe interface for the fastest SSD performance.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.2 – Motherboard expansion slots and storage interfaces:

“High-end video cards require a PCIe slot, while NVMe drives use M.2 (PCIe) slots for the highest data transfer rates.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Motherboard & Storage

CompTIA Exam Objectives 220-1101, Domain 3.2

============

Elasticity in cloud computing refers to the ability to automatically scale resources up or down based on demand, making it ideal for businesses with fluctuating workloads.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.7 – Cloud characteristics:

“Elasticity allows cloud customers to quickly and automatically scale computing resources in response to changing demand.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Cloud Concepts

CompTIA Exam Objectives 220-1101, Domain 3.7

NTP (Network Time Protocol) is specifically designed to synchronize the clocks of networked computers and devices automatically.

From CompTIA A+ 220-1101 Official Study Guide, Objective 2.6 – Network services and protocols:

“NTP is used to automatically synchronize system clocks on network devices, ensuring all systems have accurate time.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 2: Networking Protocols

CompTIA Exam Objectives 220-1101, Domain 2.6

============

Firewalls are specifically designed to monitor, filter, and control network traffic using Access Control Lists (ACLs). ACLs define which traffic is allowed or denied based on parameters like IP address, protocol, or port.

From CompTIA A+ 220-1101 Official Study Guide, Objective 2.2 – Networking hardware and security:

“Firewalls use access control lists (ACLs) to allow or deny traffic based on rules. Unmanaged switches and PoE injectors do not support ACLs.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 2: Networking Security Devices

CompTIA Exam Objectives 220-1101, Domain 2.2

============

Badging refers to the use of NFC-enabled ID badges or cards that authenticate users when tapped against a reader for secure print or access control.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.4 – Secure printing and authentication:

“NFC authentication is commonly implemented using employee badges, allowing secure and convenient access to devices and functions.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Secure Print Solutions

CompTIA Exam Objectives 220-1101, Domain 3.4

============

When a laser printer intermittently fails to feed paper, the most common hardware cause is worn or dirty pickup rollers. These rollers grab the paper from the tray and move it into the printer. Over time, dust, paper debris, or worn rubber reduces their effectiveness, causing feeding issues.

From the CompTIA A+ 220-1101 Official Study Guide, Objective 4.3 – Troubleshoot printing problems:

“If the printer is not picking up paper correctly or is experiencing paper jams, check and clean or replace the pickup rollers and separation pads as these are responsible for feeding paper into the print path.”

Other options like updating drivers, selecting paper size, or replacing toner will not resolve a mechanical paper feed problem.

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 4: Troubleshooting Printing Problems

CompTIA Exam Objectives 220-1101, Domain 4.3

============

A VLAN (Virtual Local Area Network) is a network technology used to logically segment a physical network into multiple distinct broadcast domains, even if they share the same hardware.

From the CompTIA A+ 220-1101 Official Study Guide, Objective 2.2 – Compare and contrast common networking hardware:

“VLANs allow network administrators to segment a network logically, isolating broadcast traffic and improving security and management, regardless of the physical network layout.”

Other options explained:

MAC (Media Access Control) is a hardware address, not a segmentation method.

NIC (Network Interface Card) is network hardware, not for logical segmentation.

DSL (Digital Subscriber Line) is an internet connection type.

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 2: Networking Concepts

CompTIA Exam Objectives 220-1101, Domain 2.2

Overheating is a common cause of projectors shutting down after extended use. A clogged air filter can cause overheating, resulting in intermittent shutdowns.

From CompTIA A+ 220-1101 Official Study Guide, Objective 4.1 – Troubleshooting displays:

“If a projector shuts down after running for a period, clean or replace the filter to prevent overheating and automatic shutdown.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 4: Display Troubleshooting

CompTIA Exam Objectives 220-1101, Domain 4.1

============

Port flapping refers to a network port continuously going up and down, which can prevent the access point from fully coming online.

From CompTIA A+ 220-1101 Official Study Guide, Objective 2.4 – Wired and wireless troubleshooting:

“Repeated loss and restoration of network link is called port flapping and may result in network devices, such as access points, not coming online.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 2: Network Troubleshooting

CompTIA Exam Objectives 220-1101, Domain 2.4

============

A hypervisor allows multiple operating systems to run simultaneously on a single physical host, making it the ideal solution for providing concurrent access to different test environments. Developers can use virtual machines (VMs) for testing and development.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.7 – Compare and contrast cloud computing concepts:

“A hypervisor is software that enables multiple operating systems to run on a single host as virtual machines. This is commonly used in development and testing environments for flexibility and isolation.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Virtualization

CompTIA Exam Objectives 220-1101, Domain 3.7

A failing CPU fan may make unusual noises (including clicking) and, if it is not cooling the CPU, the system will quickly overheat and shut down to prevent damage.

From CompTIA A+ 220-1101 Official Study Guide, Objective 4.1 – Troubleshooting hardware problems:

“Overheating due to a failed or obstructed CPU fan can cause frequent shutdowns. Loud noises are a sign the fan should be checked first.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 4: PC Hardware Troubleshooting

CompTIA Exam Objectives 220-1101, Domain 4.1

============

F-type connectors are commonly used to terminate coaxial cables in cable internet, cable TV, and satellite connections.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.1 – Network cables and connectors:

“F-type connectors are used for coaxial cable terminations in cable modem and TV installations.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Networking Cables and Connectors

CompTIA Exam Objectives 220-1101, Domain 3.1

============

solution as

A screenshot of a network settings AI-generated content may be incorrect.

A screenshot of a computer AI-generated content may be incorrect.

A screenshot of a computer AI-generated content may be incorrect.

A Trusted Platform Module (TPM) is a hardware chip used to enable encryption technologies such as BitLocker, providing secure key storage for system-wide encryption.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.5 – Security features:

“A TPM chip is required for system encryption, storing encryption keys securely on the hardware.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Security Hardware

CompTIA Exam Objectives 220-1101, Domain 3.5

============

If a printer is set to use a special tray (for cards/invitations) but a different type of print job is attempted (like a letter), a paper tray setting mismatch can cause errors. Changing the tray setting to match the print media resolves the issue.

From CompTIA A+ 220-1101 Official Study Guide, Objective 4.3 – Troubleshooting printers:

“If print jobs fail when media type changes, verify and adjust the paper tray settings to match the required output.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 4: Printer Troubleshooting

CompTIA Exam Objectives 220-1101, Domain 4.3

============

The digitizer is the component responsible for detecting touch input on a screen. If touch is not registering and there's no physical damage, the digitizer may be faulty.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.1 – Mobile device hardware:

“If a touchscreen device does not respond to input and the screen is intact, the digitizer (touch sensor) may be defective.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Mobile Hardware

CompTIA Exam Objectives 220-1101, Domain 3.1

============

Firmware is the embedded software on a device such as a printer. Manufacturers often release firmware updates to resolve hardware-specific functionality issues, such as scan-to-email or security vulnerabilities.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.4 – Printer installation and maintenance:

“Firmware updates provide bug fixes and add new features for multifunction printers. Apply firmware updates to resolve device-specific issues.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Printer Maintenance

CompTIA Exam Objectives 220-1101, Domain 3.4

============

Dedicated resources (sometimes called single-tenant or bare metal) guarantee that physical hardware is allocated exclusively to one customer and not shared.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.7 – Cloud deployment models:

“Dedicated resources ensure data isolation at the hardware level for compliance and security.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Cloud Deployment

CompTIA Exam Objectives 220-1101, Domain 3.7

============

Assigning astatic IP addressto a network printer ensures it always retains the same address, allowing users and print servers to consistently reach it even after a reboot or network refresh.

Option B (Private address):Refers to address ranges (e.g., 192.168.x.x) — doesn't guarantee address persistence.

Option C (Wi-Fi):Is a connection method, not a method of IP assignment.

Option D (Dynamic addressing):Via DHCP, which can change over time unless reservations are made (less reliable).

CompTIA A+ Core 1 Exam Objective Reference:

Objective 3.4: Given a scenario, install and configure printers.