SOA-C03 Sample Questions Answers

According to the AWS Cloud Operations and Identity Management documentation, when configuring federation between IAM Identity Center (formerly AWS SSO) and an external SAML 2.0 identity provider, two key prerequisites are required:

The IAM Identity Center SAML metadata file — This is uploaded to the external IdP to establish trust, define SAML endpoints, and enable identity federation.

The IdP metadata (including the public X.509 certificate) — This information is imported into IAM Identity Center to validate authentication assertions and encryption signatures.

IAM Identity Center and the IdP exchange this metadata to mutually establish secure, bidirectional federation.

Network-level details such as IP addresses (Option C) are unnecessary. Root access (Option D) or permissions to member accounts (Option E) are not required; only Control Tower or IAM administrative permissions in the management account are needed for setup.

Thus, the correct answer is A and B — the SAML metadata from both sides is required for federation.

Comprehensive and Detailed Explanation From Exact Extract of AWS CloudOps Doocuments:

With simple scaling policies, an Auto Scaling group performs one scaling activity when the alarm condition is met, then observes a default cooldown period (300 seconds) before another scaling activity of the same type can begin. CloudOps guidance explains that cooldown prevents rapid successive scale-outs by allowing time for the newly launched instance(s) to register with the load balancer and impact the metric. Even if the alarm breaches multiple times during the cooldown window, the group waits until the cooldown completes before evaluating and acting again. In this case, although RequestCountPerTarget exceeded the threshold twice within 180 seconds, the group will launch a single instance and then wait for cooldown before any additional scale-out can occur. Options A, C, and D do not reflect the behavior of simple scaling with cooldowns; A describes step/target-tracking-like behavior, and C/D are not Auto Scaling mechanics.

Comprehensive and Detailed Explanation From Exact Extract of AWS CloudOps Documents:

CloudFront is a global edge network service, and its performance (latency and data transfer behavior) depends heavily on the geographic location of viewers and the edge locations that serve them. Therefore, a valid load test must generate traffic from multiple geographic regions to reflect real user distribution and to measure end-to-end latency across diverse network paths.

Additionally, CloudFront uses DNS to return multiple possible edge IP addresses and can direct clients to different edge locations based on resolver behavior and network conditions. For a realistic test, each client should make an independent DNS request and distribute traffic across the returned IP addresses, rather than pinning all load to a single IP. Spreading requests across the returned set avoids biasing the test to one edge path and better represents how real browsers and applications resolve and connect to CloudFront.

Options A and B fail to model global viewer behavior because they test from only one region. Option C introduces an unrealistic constraint by forcing identical DNS resolution and concentrating load on a single IP address, which can distort latency and throughput results. Option D best matches CloudOps guidance for performance validation of CDN workloads: multi-region testing with realistic DNS resolution and traffic distribution.

According to the AWS Cloud Operations and Disaster Recovery documentation, the active-active multi-Region architecture provides the lowest possible RTO and RPO among all disaster recovery strategies. In this approach, workloads are deployed and actively running in multiple AWS Regions simultaneously. All data is continuously replicated in real time between Regions using fully managed replication services, ensuring zero data loss (zero RPO).

Because both Regions are active and capable of handling requests, failover between them is instantaneous, meeting the RTO of less than 10 minutes. Amazon Route 53 is used with weighted or latency-based routing policies and health checks to automatically route traffic away from an impaired Region to the healthy Region without manual intervention.

In contrast:

Pilot Light Architecture maintains only a minimal copy of the environment in the secondary Region. It requires time to scale up infrastructure during a disaster, resulting in longer RTO and potential data loss (non-zero RPO).

Warm Standby Architecture keeps partially running infrastructure in the secondary Region. Although faster than pilot light, it still requires scaling and synchronization, resulting in higher RTO and RPO compared to active-active.

Backup and Restore (option D) relies on periodic backups and restores data when needed. This approach has the highest RTO and RPO, unsuitable for mission-critical workloads demanding high availability and zero data loss.

Therefore, based on AWS-recommended disaster recovery strategies outlined in the AWS Cloud Operations and Disaster Recovery Guide, the Active-Active Multi-Region architecture (Option C) is the only approach that guarantees RTO <10 minutes and RPO = 0, achieving continuous availability and business continuity across Regions.

Tagging is essential for governance, cost management, and automation in CloudOps operations. The AWS Organizations tag policies feature allows centralized definition and enforcement of required tag keys and accepted values across all accounts in an organization. According to the AWS CloudOps study guide under Deployment, Provisioning, and Automation, tag policies enable automatic validation of tags, ensuring consistency with minimal manual overhead.

Once tagging consistency is enforced, enabling cost allocation tags in the AWS Billing and Cost Management console allows accurate cost distribution per business unit. AWS documentation states:

“Use AWS Organizations tag policies to standardize tags across accounts. You can activate cost allocation tags in the Billing console to track and allocate costs.”

Option B introduces unnecessary complexity with Lambda automation. Option C detects but does not enforce tagging. Option D limits flexibility to Service Catalog resources only. Therefore, Option A provides a centrally managed, automated, and low-overhead solution that meets CloudOps tagging and cost-tracking requirements.

Per the AWS Cloud Operations and Security Automation documentation, Security Hub integrates with Amazon EventBridge to publish findings in real time. These events can trigger automated responses using AWS Lambda functions or AWS Systems Manager Automation runbooks.

In this scenario, the correct CloudOps approach is to configure the existing EventBridge rule to invoke a Lambda function that inspects the event payload, identifies the affected security group, and removes the offending inbound rule (e.g., port 21 open to 0.0.0.0/0).

This event-driven remediation provides continuous compliance and eliminates manual intervention. Cron jobs (Options B and C) contradict event-driven design and add operational overhead. Stopping instances (Option A) doesn’t address the root cause — the insecure security group.

Thus, Option D aligns with AWS best practices for automated security remediation through EventBridge and Lambda.

Comprehensive and Detailed Explanation From Exact Extract of AWS CloudOps Documents:

The most operationally efficient approach is A: copy the AMI to each target Region using copy-image and update the CloudFormation template to reference the correct AMI IDs per Region (commonly via Mappings or parameters). AMIs are regional resources, so an AMI built in us-east-1 cannot be launched directly in other Regions without copying. The copy-image operation is the standard, supported method to replicate an AMI across Regions while preserving the image configuration and backing snapshots in the destination Region.

Once AMIs exist in each Region, CloudFormation can be executed in each Region using the same template logic. Adding mappings for AMI IDs keeps the deployment consistent and repeatable, aligning with Infrastructure as Code practices and minimizing manual steps.

Option B is more work than necessary because copying snapshots and re-creating AMIs adds extra steps and increases the chance of inconsistency. Option C is incomplete because the template will fail or launch incorrect resources if it references an AMI ID that does not exist in the target Region. Option D is not feasible because an Auto Scaling group is a regional construct and cannot span multiple Regions from a single stack update in us-east-1.

The AWS Cloud Operations and Storage documentation confirms that S3 Transfer Acceleration is designed to increase upload speed for objects transferred to S3 buckets over long distances.

It uses AWS Global Edge Network and Amazon CloudFront edge locations to route data through optimized network paths, reducing latency and achieving higher throughput compared to standard S3 uploads.

After enabling Transfer Acceleration on the bucket, users upload files to the accelerated endpoint (e.g., bucketname.s3-accelerate.amazonaws.com). This feature requires no changes to application logic besides endpoint modification and provides immediate performance improvement.

CloudFront (Option A) is for content delivery, not uploads. ElastiCache (Option B) and Global Accelerator (Option C) are unrelated to S3 upload performance.

Thus, Option D is correct — enable S3 Transfer Acceleration for faster, optimized file uploads.

An alias record is the recommended Route 53 record type to map domain names (e.g., example.com) to AWS-managed resources such as an Application Load Balancer. Alias records are extension types of A or AAAA records that support AWS resources directly, providing automatic DNS integration and no additional query costs.

AWS documentation states:

“Use alias records to map your domain or subdomain to an AWS resource such as an Application Load Balancer, CloudFront distribution, or S3 website endpoint.”

A and AAAA records are used for static IP addresses, not load balancers. CNAME records cannot be used at the root domain (e.g., example.com). Thus, Option C is correct as it meets CloudOps networking best practices for scalable, managed DNS resolution to ALBs.

Comprehensive and Detailed Explanation From Exact Extract of AWS CloudOps Documents:

The most operationally efficient solution is C because AWS Systems Manager Session Manager is purpose-built for secure, auditable interactive access to EC2 instances at scale—without managing bastion hosts or distributing SSH keys. Session Manager can be configured to log session activity, including commands and output, to durable destinations such as Amazon CloudWatch Logs (and optionally Amazon S3). This directly satisfies the requirement to record interactive sessions and store logs durably.

For automated notifications and alarms, CloudWatch Logs supports metric filters that transform matching log patterns into CloudWatch metrics. Those metrics can then drive CloudWatch alarms and notifications (for example, via Amazon SNS). This is a standard CloudOps pattern: centralize logs, derive metrics from security-relevant patterns, and alert automatically.

Option A and D require installing and operating agents and building a more complex analytics path (Athena queries for alerting), which is less efficient and introduces more moving parts across thousands of instances. Option B adds a bastion host dependency that becomes an operational burden (scaling, patching, hardening, HA) and a potential choke point. Session Manager reduces these burdens by using SSM Agent already installed, IAM-based access control, and centralized logging/monitoring integrations.

According to the AWS Cloud Operations and ElastiCache documentation, cache evictions occur when the cache runs out of memory and must remove items to make space for new data.

To reduce evictions and retain frequently accessed items, AWS recommends increasing the total available memory — either by scaling up to larger node types or scaling out by adding shards/nodes. Migrating to a cluster with larger nodes is the simplest and most efficient solution because it immediately expands capacity without architectural changes.

Adjusting TTL (Options B and C) controls expiration timing, not memory allocation. Adding a single node (Option A) may help, but redistributing data requires resharding, introducing more complexity.

Thus, Option D provides the lowest operational overhead and ensures high cache hit rates by increasing total cache memory.

As per the AWS Cloud Operations and Content Delivery documentation, CloudFront determines cache behavior by evaluating both origin headers (e.g., Cache-Control and Expires) and distribution-level TTL settings.

When Cache-Control max-age conflicts with the Maximum TTL configured in CloudFront, the shorter TTL value takes precedence. This results in CloudFront caching content for only 5 minutes instead of 1 hour, despite the origin headers suggesting a longer duration.

AWS documentation explicitly states: “When both origin cache headers and CloudFront TTL settings are defined, CloudFront uses the most restrictive caching period.” This mismatch causes the perceived performance drop, as CloudFront frequently revalidates content.

Therefore, Option D is correct — cache-duration settings conflict with each other, leading to unexpected caching behavior.

Comprehensive and Detailed Explanation From Exact Extract of AWS CloudOps Documents:

The requirement is preventative: stop users from launching from unapproved AMIs. The most scalable approach with 75 approved AMIs is to tag all approved AMIs (for example, ApprovedAMI=true) and enforce usage through an IAM policy condition that only allows ec2:RunInstances when the ec2:ImageId resource (the AMI) includes the required tag. This avoids maintaining long allow/deny lists of AMI IDs and supports continuous updates: as new approved AMIs are created, tagging them automatically brings them under the policy without policy rewrites.

Option B is incorrect because service-linked roles are used by AWS services, not assigned to users for interactive authorization enforcement in this way. Option C and D are detective/remedial controls that act after instances are already launched, which does not satisfy “must prevent.” They also increase operational overhead and risk disruptions.

Comprehensive and Detailed Explanation From Exact Extract of AWS CloudOps Documents:

With the Managed-CachingDisabled policy, CloudFront is configured to minimize edge caching, so the remaining caching behavior users experience often comes from browser (client-side) caching. If users refresh and still see old content, it typically indicates the browser is allowed to reuse a cached copy without revalidating. The correct fix is to control client caching using HTTP response headers on the S3 object.

Adding a Cache-Control: max-age=0 header instructs browsers that the object becomes stale immediately and should be revalidated on subsequent requests (often resulting in conditional requests using If-Modified-Since or ETag behavior). This preserves correctness—users will fetch or revalidate the latest file—without requiring heavier operational actions like frequent CloudFront invalidations or changing to an optimized caching policy that may increase edge caching.

Option B can worsen the issue by increasing caching if object headers permit it. Option C is unrelated; versioning affects object history and recovery, not browser cache behavior. Option D affects payload size transfer (gzip/brotli), not cache freshness.

The most secure pattern is to use an IAM role for Amazon EC2 with the minimum required permissions. AWS guidance states: “Use roles for applications that run on Amazon EC2 instances” and “grant least privilege by allowing only the actions required to perform a task.” By attaching a role to the instance, short-lived credentials are automatically provided through the instance metadata service; this removes the need to create long-term access keys or embed secrets. Granting only sqs:SendMessage, sqs:ReceiveMessage, and sqs:DeleteMessage against the specific SQS queues enforces least privilege and aligns with CloudOps security controls. Options A and B rely on IAM user access keys, which contravene best practices for workloads on EC2 and increase credential-management risk. Option C uses a role but grants sqs:*, violating least-privilege principles. Therefore, Option D meets the security requirement with scoped, temporary credentials and precise permissions.

Comprehensive and Detailed Explanation From Exact Extract of AWS CloudOps Documents:

The correct answers are B and D. AWS CloudOps documentation clearly states that AWS Secrets Manager is the recommended service for storing and managing database credentials securely. Secrets Manager integrates natively with Amazon RDS and supports automatic, scheduled secret rotation.

To rotate credentials weekly, Secrets Manager requires a Lambda rotation function. AWS provides managed rotation templates for Amazon RDS for MySQL that update the database password and the stored secret atomically. This combination ensures credentials are protected, rotated automatically, and audited with minimal operational effort.

Option A is incorrect because RDS Proxy does not store or rotate credentials; it only retrieves them from Secrets Manager. Option C is incorrect because Systems Manager Parameter Store does not support native automatic rotation. Option E is incorrect because Automation runbooks are not the recommended mechanism for secrets rotation and add unnecessary complexity.

AWS CloudOps best practices strongly recommend Secrets Manager with Lambda-based rotation for database credential protection and compliance.

Comprehensive and Detailed Explanation From Exact Extract of AWS CloudOps Documents:

AWS Lambda automatically publishes operational metrics to Amazon CloudWatch, including Duration, which represents the time a function invocation takes to run. To alert when processing time exceeds 10 seconds, the most direct and operationally efficient solution is to create a CloudWatch alarm on the Lambda Duration metric and configure the alarm action to publish to an SNS topic. This meets the monitoring requirement without requiring log parsing or additional query mechanisms.

Option B fits best because it uses the built-in metric stream for Lambda observability: CloudWatch metrics are near real-time, require minimal configuration, and alarms are a standard CloudOps practice for proactive notification. The alarm can be configured with the appropriate statistic (for example, Maximum or p99 via metric math where applicable) and a threshold of 10,000 milliseconds, ensuring the operations team is notified before performance degrades further.

Option A is incorrect because PostRuntimeExtensionsDuration is not the primary runtime metric for function execution time, and extracting runtime from logs is unnecessary. Option C changes the function timeout to 10 seconds, which would cause failures rather than simply notifying on slow executions. Option D is more operationally complex because it relies on log queries; CloudWatch alarms are more straightforward when a native metric exists.

According to AWS Cloud Operations and Governance documentation, AWS Trusted Advisor provides automated checks for security group rules across all accounts, including identifying ports open to 0.0.0.0/0.

When viewed in organizational mode, Trusted Advisor integrates with AWS Organizations, allowing administrators to access organization-wide security findings from a central management account. This approach requires no custom code, additional infrastructure, or manual inspection, providing immediate visibility and the lowest operational overhead.

AWS CLI scripts (Option A) or Lambda automation (Option C) introduce additional maintenance, and Amazon Inspector (Option D) is focused on instance-level vulnerabilities, not network access rules.

Therefore, Option B is the AWS-recommended CloudOps best practice for centralized and low-effort open-port auditing.

Comprehensive and Detailed Explanation From Exact Extract of AWS CloudOps Documents:

The correct answer is D because target tracking scaling policies are designed to automatically maintain a specific metric at a desired target value with the least administrative effort. AWS CloudOps documentation states that target tracking works like a thermostat, continuously adjusting capacity to keep the selected metric close to the defined target.

By specifying a target value of 40% average CPU utilization, the Auto Scaling group automatically scales out or in based on real-time demand without requiring manual thresholds, multiple alarms, or predefined scaling steps. This approach is fully managed by AWS and is the most operationally efficient option.

Option A is incorrect because scheduled scaling is based on predictable traffic patterns and cannot respond dynamically to real-time load changes. Option B is incorrect because simple scaling reacts only after an alarm is triggered and does not continuously maintain a target value. Option C is less efficient because step scaling requires additional configuration and tuning of scaling steps.

AWS CloudOps best practices clearly recommend target tracking scaling policies for maintaining steady performance metrics with minimal operational overhead.

As per AWS Cloud Operations, Bedrock, and Governance documentation, AWS CloudTrail is the authoritative service for capturing API activity and audit trails across AWS accounts. For Amazon Bedrock, CloudTrail records all user-initiated API calls, including interactions with agents, knowledge bases, and generative AI model parameters.

Using CloudTrail Lake, organizations can store, query, and analyze CloudTrail events directly without needing to export data. CloudTrail Lake supports SQL-like queries for generating audit and compliance reports, enabling the company to retrieve information such as user identity, API usage, timestamp, model or agent ID, and invocation parameters.

In contrast, CloudWatch focuses on operational metrics and log streaming, not API-level identity data. OpenSearch or Flink would add unnecessary complexity and cost for this use case.

Thus, the AWS-recommended CloudOps best practice is to leverage CloudTrail with CloudTrail Lake to maintain auditable, queryable API activity for Bedrock workloads, fulfilling governance and compliance requirements.

Comprehensive and Detailed Explanation From Exact Extract of AWS CloudOps Doocuments:

VPC Flow Logs show the request arriving and being ACCEPTed on dstport 8080 and the corresponding response being REJECTed on the return path to the client’s ephemeral port (59003). AWS networking guidance states that security groups are stateful (return traffic is automatically allowed) while network ACLs are stateless and require explicit inbound and outbound rules for both directions. CloudOps operational guidance for VPC networking further notes that when you allow an inbound request (for example, TCP 8080) through a subnet’s network ACL, you must also allow the outbound ephemeral port range (typically 1024–65535) for the response traffic; otherwise, the return packets are dropped and appear as REJECT in flow logs. The observed pattern—request accepted to 8080, response rejected to 59003—matches a missing outbound ephemeral-range allow on the subnet’s NACL. Therefore, the cause is the subnet NACL, not security groups or on-premises ACLs. The remediation is to add an outbound ALLOW rule on the NACL for the appropriate ephemeral TCP port range back to the on-premises CIDR (and the corresponding inbound rule if asymmetric).

AWS Systems Manager Session Manager allows secure, auditable instance access without SSH keys or inbound ports. To control access based on instance tags, CloudOps best practices require two configurations:

Attach an IAM policy to users or groups granting ssm:StartSession, ssm:DescribeInstanceInformation, and ssm:DescribeSessions.

Include a Condition element in the IAM policy referencing instance tags, such as Condition: {"StringEquals": {"ssm:resourceTag/Environment": "Production"}}.

This ensures users can start sessions only with instances that have matching tags, providing fine-grained access control.

AWS CloudOps documentation under Security and Compliance states:

“Use IAM policies with resource tags in the Condition element to restrict which managed instances users can access using Session Manager.”

Options B and D incorrectly suggest attaching roles or service accounts that are not relevant to user-level access control. Option C (placement groups) pertains to networking and performance, not access management. Therefore, A and E together provide tag-based, least-privilege access as required.

Per the AWS Cloud Operations and Data Protection documentation, S3 Object Lock enforces write-once-read-many (WORM) protection on objects for a defined retention period.

There are two modes:

Compliance mode: Even the root user cannot delete or modify objects during the retention period.

Governance mode: Privileged users with special permissions can override lock settings.

For regulatory or audit requirements that prohibit deletion, Compliance mode is the correct choice. When configured with a 3-month retention period, all backup objects are protected from deletion until expiration, ensuring compliance with data retention mandates.

Versioning (Option C) alone does not prevent deletion. IAM-based restrictions (Option A) lack time-based enforcement and require manual intervention. Governance mode (Option D) is less strict and unsuitable for regulatory retention.

Thus, Option B is the correct CloudOps solution for immutable S3 backups.

According to the AWS Cloud Operations and Deployment documentation, EC2 Image Builder is the AWS-managed service for automating the creation, maintenance, validation, and deployment of secure and compliant Amazon Machine Images (AMIs).

It allows CloudOps teams to define image pipelines that include only approved software modules and configuration scripts. EC2 Image Builder automatically tests and verifies these AMIs for compliance before deployment.

This process ensures configuration consistency, eliminates manual installation errors, and simplifies ongoing patch management. The service integrates with AWS Systems Manager, Amazon Inspector, and AWS CloudFormation for end-to-end automation.

In contrast:

Amazon Detective and GuardDuty (Options A & B) are security monitoring tools, not image management solutions.

Run Command (Option C) applies ad-hoc updates but does not create standard, reusable AMIs.

Therefore, Option D is correct—EC2 Image Builder provides the most operationally efficient and compliant way to create an approved baseline AMI for future deployments.