LEED-Green-Associate Sample Questions Answers

Per the LEED v4 BD+C Reference Guide, the baseline for energy performance evaluation is based on:

"ANSI/ASHRAE/IESNA Standard 90.1-2010" for most projects under EA Prerequisite: Minimum Energy Performance and EA Credit: Optimize Energy Performance.

This standard sets the minimum energy efficiency requirements for buildings (excluding low-rise residential) and is the benchmark against which a project's proposed design is compared when using the energy simulation modeling method (whole building energy simulation).

ASHRAE 90.1-2010 defines criteria for HVAC systems, building envelope, service water heating, power, lighting, and other systems affecting energy use.

LEED requires performance above this baseline to earn points.

The other options are not appropriate baselines:

A. SMACNA: Refers to HVAC ductwork and air quality guidelines, not energy baseline standards.

B. ENERGY STAR®: Is a benchmarking tool, not a baseline standard used in energy modeling.

D. ASHRAE 62: Covers ventilation and indoor air quality, not energy performance.

Therefore, the correct baseline standard is ASHRAE 90.1-2010.

Recycling is a strategy that can be used to reduce the amount of construction waste that is sent to landfills or incinerators. Recycling involves collecting, sorting, processing, and reusing or selling materials that would otherwise be discarded as waste. Recycling can save natural resources, reduce greenhouse gas emissions, create jobs, and lowerdisposal costs1 . References: LEED v4 Green Associate Candidate Handbook1, EPA’s Recycling Basics

The principle of life-cycle impact reduction in LEED aims to minimize the environmental impact of materials over the life span of the building. LEED v4 specifically awards points for strategies such as:

Reuse of existing buildings and materials

Design for flexibility and longevity

High-density and mixed-use developments that reduce resource consumption per capita

According to the LEED BD+C v4 Study Guide, dense, mixed-use developments are inherently more sustainable because they reduce infrastructure needs, make efficient use of land and materials, and support walkability, which further reduces environmental impacts from transportation and land development.

Option D, “a densely constructed community with mixed-use ground floor services,” directly aligns with these sustainability strategies by:

Encouraging efficient land use

Supporting reuse of space over time

Minimizing transportation impact

Facilitating shared resources

In contrast, Options A, B, and C represent conventional or low-density developments that typically require more material per capita and offer fewer opportunities for lifecycle reuse or conservation.

A site with minimal hardscape (such as concrete, asphalt, or other impervious surfaces) that has a large permeable surface (such as soil, grass, or other vegetation) results in reduced rainwater runoff. This is because permeable surfaces allow rainwater to infiltrate into the ground, replenishing the groundwater and reducing the amount of water that flows over the surface and carries pollutants into storm drains and waterways. Reducing rainwater runoff is one of the goals of the LEED v4 Location and Transportation category, which offers credits for using strategies such as green roofs, permeable paving, rain gardens, and vegetated swales

Carbon offsets are used to balance emissions by reducing or sequestering equivalent amounts of CO₂ elsewhere. LEED supports using carbon offsets to meet energy and atmosphere goals​​.

Access to quality transit is one of the criteria for the LEED v4 Location and Transportation category, which aims to reduce the environmental and human health impacts of transportation and promote sustainable site selection. By developing an urban site that is well-served by public transportation, the building owner can reduce the reliance on private vehicles, lower greenhouse gas emissions, and encourage alternative modes of travel123.

LEED v4: Building Design + Construction Guide1, page 25

LEED v4 Credit Tutorials: Location & Transportation (BD+C/ID+C)2

LEED v4 Q+A: Location and Transportation3

One of the requirements for the Sustainable Sites Credit: Rainwater Management is that projects must use Green Infrastructure (GI) and Low Impact Development (LID) techniques within the LEED project boundary. GI and LID are design approaches that mimic natural hydrologic processes to manage stormwater runoff at its source. GI and LID techniques include strategies such as rain gardens, bioswales, permeable pavements, green roofs, rain barrels, cisterns, and vegetated buffers. The other options are not requirements for the Sustainable Sites Credit: Rainwater Management. Maximizing open space within the LEED project boundary is a requirement for the Sustainable Sites Credit: Open Space. Calculating the total rainwater runoff for 75th percentile rainfall events is a requirement for the Sustainable Sites Credit: Site Assessment. Using a combination of both structural and non-structural measures to manage a 90th percentile rainfall event is an option for meeting Option 1 of the Sustainable Sites Credit: Rainwater Management. References: LEED Green Associate Candidate Handbook, page 27; USGBC, [Sustainable Sites], page 4-5.

Low-emitting materials are those that have minimal or no emissions of volatile organic compounds (VOCs) and other harmful pollutants that can affect indoor air quality (IAQ)1. Specifying and installing low-emitting materials at the source can help prevent the negative effects of indoor pollutants by reducing the exposure of occupants and workers tothese substances2. Some examples of low-emitting materials are paints, coatings, adhesives, sealants, flooring, furniture, and insulation that meet the criteria of third-party certification programs such as Green Seal, Greenguard, or SCS3.

Unless mitigated, resource consumption over the life of a conventional building incrementally increases the total emissions footprint. This is because conventional buildings often use non-renewable resources for energy and materials, which contribute to greenhouse gas emissions during extraction, production, use, and disposal. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

The increase in air temperature in a developed area resulting from the dark surfaces of roadways, parking lots, and tarred rooftops is known as heat island effect. Heat island effect is a phenomenon whereby urban areas experience higher temperatures than rural areas due to the absorption and re-emission of solar heat by man-made surfaces. Heat island effect can have negative impacts on human health, energy consumption, air quality, and climate change. Some strategies to reduce heat island effect include increasing vegetation cover, using reflective or green roofs, using cool or permeable pavements, and enhancing natural ventilation.

ASHRAE stands for the American Society of Heating, Refrigerating and Air-Conditioning Engineers, a professional organization that develops standards and guidelines for the design, operation, and maintenance of buildings. ASHRAE standards are applicable to two LEED categories: Energy and Atmosphere (EA) and Indoor Environmental Quality (IEQ). The EA category addresses the energy performance, efficiency, and renewable sources of buildings. The IEQ category addresses the indoor air quality, thermal comfort, lighting quality, and acoustic performance of buildings. Some of the ASHRAE standards that are relevant for these categories are: ASHRAE Standard 90.1 for energy efficiency;ASHRAE Standard 62.1 for ventilation; ASHRAE Standard 55 for thermal comfort; ASHRAE Standard 189.1 for high-performance green buildings1 . References: LEED v4 Green Associate Candidate Handbook1, ASHRAE’s Standards & Guidelines

Daylighting is a strategy that involves designing buildings to maximize the use of natural light and reduce the need for artificial lighting1. Daylighting can improve the indoor environmental quality by enhancing the visual comfort, mood, and productivity of the occupants2. Daylighting can also help attain points toward LEED certification by contributing to the credits in the Energy and Atmosphere and Indoor Environmental Quality categories1. Night lighting, installing indoor plants, and installing inoperable windows are not strategies that directly improve the indoor environmental quality or help attain points toward LEED certification.

According to the LEED Study Guide:

“LEED for Operations and Maintenance (LEED O+M) applies to existing buildings that are fully operational and occupied.”

This system evaluates how a building performs after it is constructed and in use, making it the correct fit for a built project.

Methane is a potent greenhouse gas that contributes to global warming and climate change. It is produced when organic waste decomposes anaerobically (without oxygen) in landfills1. Construction and demolition waste, which accounts for about a third of all solid waste generated in the world2, often contains a large amount of organic materials, such as wood, paper, and food waste1. Therefore, disposal of solid waste from building construction and operations in landfills has a substantial effect on methane emissions13. Incineration of solid waste also produces greenhouse gases, such as carbon dioxide, carbon monoxide, and hydrochloric acid, but at lower levels than landfilling45. Volatile organic compounds (VOCs) are not greenhouse gases, but they can react with other pollutants to form ozone, which is a greenhouse gas and a health hazard4.

The Integrative Process is most effective during the early design stage of a project. This is when key decisions about the project are being made that can have a significant impact on its sustainability performance. By considering sustainability objectives from the outset, teams can identify opportunities for synergies and cost savings that may not be apparent later in the project. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

According to the LeadingGreen Study Guide:

"The first step in the certification process is the Project Registration. Projects can be registered on the GBCI website (www.gbci.org)... Before registration, the process begins with selecting the appropriate rating system using the 40/60 rule... "

Thus, selecting the correctrating systemis the initial key step before registration and documentation submission. The selection ensures alignment with the project type and its characteristics.

The cost of commissioning (Cx) is often repaid with recovered energy performance. Commissioning is a process of verifying and documenting that a building and its systems meet the design intent and the owner’s project requirements. Commissioning can help improve the energy efficiency, indoor environmental quality, and occupant satisfaction of a building. According to a study by Lawrence Berkeley National Laboratory, commissioning can result in median energy savings of 13% for existing buildings and 16% for new construction, with payback times of 1.1 years and 4.2 years, respectively1. Therefore, commissioning can be acost-effective investment that pays off with reduced energy consumption and costs over the life cycle of a building. References: Building Commissioning: A Golden Opportunity for Reducing Energy Costs and Greenhouse Gas Emissions1; LEED v4 BD+C Reference Guide, Energy and Atmosphere, page 81

According to the LeadingGreen Study Guide:

“WaterSense is an EPA-sponsored program that promotes and certifies water-efficient products, programs, and practices.”

TheEnvironmental Protection Agency (EPA)is the correct federal agency.

The statement that is the U.S. Green Building Council (USGBC) vision is: Buildings and communities will regenerate and sustain the health and vitality of all life within a generation. USGBC is a non-profit organization that promotes sustainability in the building industry through its LEED rating system, education programs, advocacy initiatives, and research projects. USGBC’s vision reflects its commitment to transformingthe built environment into one that supports human health, environmental quality, social equity, and economic prosperity1 . References: LEED v4 Green Associate Candidate Handbook1, USGBC’s Vision

Non-potable water is water that is not suitable for human consumption, but can be used for other purposes that do not require potable quality water. Non-potable water sources include rainwater, reclaimed/recycled water and greywater. Greywater is wastewater from sinks, showers, bathtubs, washing machines and dishwashers that can be reused for applications such as toilet flushing, irrigation and cooling tower make-up water12. Using non-potable water can reduce the demand for potable water and contribute to LEED water efficiency credits34.

References :=

SRI Calculator | LEEDuser

What Is Solar Reflectance Index (SRI) of Materials?

Water Efficiency and LEED Certification | Contractor

Water Balance Analysis - ASHRAE

What is LEED? | Net Zero Water Inc. - Net Zero Water

Shielded light fixtures are designed to direct light downwards and prevent it from spilling over into areas where it’s not wanted, such as beyond the project boundary. This helps to prevent light trespass, which can be a form of pollution that disrupts ecosystems and human sleep patterns. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Submetering systems are devices that measure the water consumption of specific building components, such as cooling towers, irrigation systems, process water systems, or tenant spaces. They allow the facility operator to monitor and optimize the water use of different systems and identify any leaks or inefficiencies12. Submetering systems are also required for some LEED credits, such as Water Metering and Cooling Tower Water Use3.

How LEED Guides Users to Water Efficiency - Facilitiesnet1

Optimize Process Water Use | U.S. Green Building Council2

LEED Certification Tips: Water Efficiency | Buildings4

Pre-consumer recycled content refers to waste material that is diverted from the waste stream during the manufacturing process. This can include scraps or trimmings that are collected and returned to the manufacturing process. It does not include rework, regrind, or scrap materials capable of being reclaimed within the same process that generated them. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

The best way to prevent a building’s indoor pollutant(s) is to eliminate or control pollutants at the source. Indoor pollutants are substances or particles that can adversely affect the indoor air quality (IAQ) of a building and the health, comfort, and productivity of the occupants. Indoor pollutants can originate from various sources, such as building materials, furnishings, cleaning products, combustion appliances, outdoor air, or occupant activities. Eliminating or controlling pollutants at the source can prevent them from entering or spreading in the indoor environment, which can reduce the exposure and risk for the occupants. Some examples of source control strategies are: using low-emitting materials, installing local exhaust ventilation, sealingcombustion appliances, implementing green cleaning practices, and prohibiting smoking13. References: LEED v4 Green Associate Candidate Handbook1, EPA’s Indoor Air Quality3

The percentage rule is a method to determine the most appropriate LEED rating system for a project when several rating systems may be applicable1. To use this rule, first assign a rating systemto each square foot or square meter of the building, and then choose the most appropriate rating system based on the resulting percentages1. The entire gross floor area of a LEED project must be certified under a single rating system and is subject to all prerequisites andattempted credits in that rating system1. The percentage rule states that if one rating system covers more than 60% of the gross floor area, that rating system should be used1. If no rating system covers more than 60% of the gross floor area, but one covers more than 40%, then that rating system should be used1. If no rating system covers more than 40% of the gross floor area, then the project team can choose any applicable rating system1. Therefore, the answer is B. 40/60 rule.

=

LEED rating system selection guidance

According to the Indoor Environmental Quality credit category of LEED, mechanical and electrical rooms are considered unoccupied spaces. These spaces are typically not intended for human occupancy, except for maintenance or operational purposes, and therefore do not require the same level of environmental control (such as ventilation or temperature control) as occupied spaces. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Potable water is water that is suitable for drinking. Potable water meets or exceeds the Environmental Protection Agency’s (EPA) drinking water quality standards and is free of contaminants that are harmful to human health. The other options are not suitable for drinking. Graywater is wastewater from sinks, showers, and laundry that can be reused for non-potable purposes such as toilet flushing and irrigation. Greenwater is rainwater that is collected and stored for non-potable uses. Stormwater is runoff from precipitation that can carry pollutants and sediments into waterways. References: LEED Green Associate Candidate Handbook, page 26; USGBC, [Water Efficiency], page 2.

Renewable Energy Certificates (RECs) are tradable, non-tangible energy commodities that represent the environmental attributes of one megawatt-hour of electricity generated from renewable sources, such as wind, solar, hydro, or biomass1. RECs can be purchased by anyone, regardless of their location or utility provider, to support the development of renewable energy and reduce their carbon footprint2. RECs can also help projects earn points for the LEED v4 Innovation credit for Green Power and Carbon Offsets,which requires the purchase of at least 50% of the total building energy use from renewable sources or offsets for a minimum of five years3.

Using Renewable Energy for LEED Certification

Renewable Energy Certificates For Green Building Explained

LEED v4, Renewable Energy, and Carbon Offsets

The use of native plant species, captured rainwater, and evapotranspiration controllers are all strategies that can contribute to reducing outdoor water use. Native plants are adapted to local conditions and typically require less water than non-native species. Captured rainwater can be used for irrigation, reducing the need for potable water. Evapotranspiration controllers adjust irrigation schedules based on weather conditions and plant needs, preventing overwatering. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

LEED Thermal Comfort credit requires:

“Comfort Control – defined as the ability to adjust air / radiant temperature, air velocity or humidity… Ensure 50% of individual occupant space have thermal comfort controls.”

Ventilation control combined with adjustable temperature directly supports occupant comfort as per ASHRAE 55-2010.

In addition to temperature and air movement, humidity is another factor to consider when implementing thermal comfort strategies. Humidity is the amount of water vapor in the air, which affects how warm or cool people feel. High humidity can make people feel hotter and more uncomfortable, while low humidity can cause dryness and irritation of the skin, eyes, nose, and throat. Thermal comfort strategies should aim to maintain an optimal level of humidity that balances human comfort and health with energy efficiency and moisture control. The other options are not factors to consider when implementing thermal comfort strategies. Methane off-gassing is the release of methane gas from organic matter decomposition or anaerobic digestion, which contributes to greenhouse gas emissions and climate change. Carbon dioxide concentrations are a measure of indoor air quality that indicates the level of ventilation and fresh air supply in a space. Combustion processes from vehicles are sources of outdoor air pollution that emit carbon monoxide, nitrogen oxides, particulate matter, and other harmful substances. References: LEED Green Associate Candidate Handbook, page 29; USGBC, [Indoor Environmental Quality], page 2.

Good site design benefits a project in which of the following ways: makes occupants comfortable by providing green spaces. Green spaces are areas of vegetation that improve the quality of life for building occupants and visitors by providing natural views, fresh air, shade, noise reduction, and recreational opportunities. They also reduce heat island effect, improve stormwater management, and sequester carbon dioxide. The LEED Green Associate Candidate Handbook states that one of the intents of the Sustainable Sites category is to “enhance occupant comfort by providing green spaces” [1, p. 13]. References: [LEED Green Associate Candidate Handbook], [Green Spaces | U.S. Department of Energy]

Renovating an existing building using recycled and salvaged building materials is an example of a life-cycle approach to development or design. A life-cycle approach is an approach that considers the environmental impacts of a product or a project from cradle to grave, or from extraction of raw materials to disposal or reuse. Renovating an existing building using recycled and salvaged building materials reduces the environmental impacts associated with new construction, such as land use change, resource depletion, energy consumption, waste generation, and greenhouse gas emissions.The LEED Green Associate Candidate Handbook states that one of the intents of the Materials and Resources category is to “promote life-cycle assessment as a means of evaluating environmental impacts” [1, p. 15]. References: LEED Green Associate Candidate Handbook, [Life Cycle Assessment | U.S. Department of Energy]

ASHRAE 55 defines thermal comfort by outlining acceptable indoor conditions for temperature, humidity, and air movement. This standard is essential for meeting LEED Indoor Environmental Quality requirements​​.

LEED prerequisites are the minimum requirements that a project must meet in order to be eligible for LEED certification. Prerequisites are mandatory for all projects and cannot be substituted or waived. If a project does not meet a prerequisite in one credit category, it does not qualify for certification, regardless of how many points it earns in other categories123.

A project that does not meet a prerequisite in one credit category does not forfeit all points in the same credit category, as points are awarded for meeting optional credits, not prerequisites. A project cannot file a CIR (Credit Interpretation Request) to seek clarification or exception for a prerequisite, as CIRs are only applicable for credits. A projectcannot substitute a prerequisite from an alternative rating system, as prerequisites are specific to each rating system and reflect the minimum standards for that system

Placing grilles, grates or mats at all major entrances is an example of permanent entryway systems used to reduce dust, dirt and contaminants brought into a facility. Permanent entryway systems are designed to capture dirt and particulates from people’s shoes and prevent them from entering the indoor environment. This improves the indoor air quality and reduces the need for cleaning and maintenance. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving indoor environmental quality is to “use permanent entryway systems (grilles, grates, mats) to reduce particulate matter being brought into buildings at regular entryways” [1, p. 16]. References: LEED Green Associate Candidate Handbook, [Indoor Environmental Quality | U.S. Green Building Council]

The Forest Stewardship Council (FSC) is an independent, non-governmental organization that promotes responsible management of the world’s forests. FSC sets standards for forest management that ensure environmental, social, and economic benefits for present and future generations. FSC also certifies forest products that meet its standards through a chain of custody system that tracks the origin and processing of the products. A wood product that is certified by FSC is guaranteed to be harvested from a well-managed source that protects biodiversity, respects indigenous rights, maintains forest productivity, and supports local communities1 . References: LEED v4 Green Associate Candidate Handbook1, FSC’s What We Do

Integrative process is a collaborative approach that involves all project stakeholders in the design and decision-making process from the beginning to the end of a project. It aims to optimize the performance, environmental, social, and economic outcomes of a project by considering the interrelationships and synergies between various building and site systems. One of the key aspects of integrative process is to establish feedback loops that allow for continuous monitoring, evaluation, and improvement of the project performance during its operation. Therefore, option C is an example of integrative process, while the other options are not directly related to it. References: Integrative process | U.S. Green Building Council, section “Integrative Process”; Understanding Integrative Design in LEED v4, page 1; LEED Integrative Process Credit Explained, section “INTEGRATIVE PROCESS V4 CREDIT OVERVIEW”

LEED for Building Operations and Maintenance (O+M) is the rating system that applies to existing buildings and interior spaces that have been fully operational and occupied for at least one year1. It focuses on performance-oriented sustainable strategies and outcomes, such as energy efficiency, water conservation, waste management, indoor environmental quality, and transportation2. LEED O+M can help existing buildings reduce their environmental impacts and improve their operations1.

 2 LEED rating system | U.S. Green Building Council1 LEED for Existing Buildings (LEED-EB) | Harvard Energy & Facilities.

According to LEED guidelines:

“Integrated Project Delivery phases: Pre-Design, Design, Bidding, Commissioning, Occupancy”

Commissioning aligns with these project phases for quality assurance and system verification.

The Energy Policy Act of 1992 (EPAct of 1992) is a United States government act that set goals, createdmandates, and amended utility laws to increase clean energy use and improve overall energy efficiency in the United States1. The EPAct of 1992 is a baseline standard for the Energyand Atmosphere prerequisite category in LEED v4, which aims to reduce the environmental and economic impacts of excessive energy use and promote the use of renewable and alternative energy sources2. The EPAct of 1992 establishes the minimum energy performancerequirements for buildings, such as lighting power density, HVAC efficiency, and water heating efficiency3. The EPAct of 1992 also provides tax incentives and grants for energy conservationand renewable energy projects1. The EPAct of 1992 was amended by the Energy Policy Act of 2005, which updated some of the provisions and standards of the original act4.

Construction Waste Management is tracked by weight:

“LEED tracks the total amount of waste diverted from landfills in terms of weight or volume.”

This provides a quantitative measure of how much waste was properly managed.

The amount of landfill-destined waste generated during project construction can be reduced by requiring the general contractor to follow requirements for using dimensional construction materials, prefabrication or material efficient framing. These methods reduce the amount of material waste by minimizing cutting, fitting, and trimming on site, and by using standardized or modular components that can be easily reused or recycled. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving materials and resources efficiency is to “reduce construction waste through efficient framing techniques” [1, p. 15]. References: LEED Green Associate Candidate Handbook, [Reducing Construction Waste | U.S. Environmental Protection Agency]

A brownfield site is appropriate for development of LEED projects because it is a site that has been previously used for industrial or commercial purposes and may be contaminated by pollutants or hazardous substances. Developing a brownfield site can help reduce environmental impacts, such as soil erosion, habitat loss, and water consumption, by reusingexisting infrastructure and restoring degraded land. LEED projects can earn credits for developing on brownfield sites under the Sustainable Sites category. References: LEED v4 BD+C Reference Guide, Sustainable Sites, page 35; Best Management Practice #14: Alternative Water Sources1

A waste reduction, reuse and recycling program must collect and measure the waste diverted through recycling and reuse, which is the amount of waste that is prevented from going to landfills or incinerators by being recovered, reused, or recycled. This is one of the key indicators of the environmental performance and benefits of a waste management program, as it can reduce greenhouse gas emissions, conserve natural resources, save energy and water, and create jobs. LEED v4.1 recognizes and rewards this strategy in the Construction and Demolition WasteManagement credit1, which aims to reduce construction and demolition waste disposed of in landfills and incineration facilities2. The other options are not directly related to the waste reduction, reuse and recycling program, as they involve different types of materials or metrics that are not relevant for measuring waste diversion. References: LEED Link: Construction and Demolition Waste Management, section “LEED v4.1 BD+C: Construction and Demolition Waste Management”; LEED v4 Waste Management Credits - Zero Waste, section “LEED v4 Waste Management Credits”

EPA’s ENERGY STAR Portfolio Manager is a no-cost, interactive energy management tool that allows you to securely track and assess energy and water consumption across your building portfolio12. You can use Portfolio Manager to benchmark your building’s performance, set investment priorities, verify savings, and apply for ENERGY STAR certification23. Portfolio Manager does not measure embodied energy, which is the total amount of energy required to produce, transport, and install building materials.

Installing dual-flush toilets can significantly reduce indoor water demand. Dual-flush toilets have two flush options: a half flush for liquid waste and a full flush for solid waste. By using less water for liquid waste, these toilets can reduce overall water consumption by up to 30%, helping to achieve the owner’s water reduction goal. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Acomposting toileteliminates water use by not requiring any water for flushing, unlike traditional or low-flow fixtures:

“Composting toilets… operate without water use, thus eliminating indoor water demand for flushing.”

WaterSense toilets and low-flow lavatories reduce water use but do not eliminate it.

A vegetated roof, also known as a green roof, is a roof that is partially or completely covered with vegetation and a growing medium, such as soil or compost. A vegetated roof can help reduce the heat island effect and manage rainwater runoff by providing the following benefits12:

It reduces the surface temperature of the roof by reflecting solar radiation and cooling the air through evapotranspiration, which is the process of plants releasing water vapor from their leaves. This can lower the ambient temperature of the surrounding area and improve thermal comfort for occupants and pedestrians.

It reduces the amount and speed of stormwater runoff by retaining and filtering rainwater in the vegetation and growing medium. This can prevent flooding, erosion, and pollution of downstream water bodies, as well as reduce the demand for potable water for irrigation or other purposes.

It enhances the biodiversity and habitat of the urban environment by providing a space for plants, animals, insects, and microorganisms to thrive. This can improve the ecological health and resilience of the ecosystem and provide aesthetic and recreational benefits for humans.

Other strategies that can contribute to reducing the heat island effect and managing rainwater runoff are:

White cement roof pavers: These are tiles made of concrete that have a high solar reflectance index (SRI), which measures how well a surface reflects solar radiation. White cement roof pavers can help reduce the surface temperature of the roof by reflecting more solar radiation than darker or less reflective materials. However, they do not provide any benefits for stormwater management, as they are impervious surfaces that do not retain or filter rainwater34.

A rainwater collection system: This is a system that captures and stores rainwater from roofs or other surfaces for reuse. A rainwater collection system can help reduce stormwater runoff by diverting rainwater from landfills or incinerators to other destinations, such as irrigation, toilet flushing, or cooling. However, it does not provide any benefits for reducing the heat island effect, as it does not affect the surface temperature of the roof or the surrounding air5 .

Shading structures that include photovoltaic panels: These are structures that provide shade for roofs or other surfaces by blocking direct sunlight. Shading structures that include photovoltaic panels can help reduce the heat island effect by lowering the surface temperature of the roof or the shaded area. They can also help generate renewable energy from solar power, which can reduce greenhouse gas emissions and energy costs. However, they do not provide any benefits for stormwater management, as they do not retain or filter rainwater .

ENERGY STAR Portfolio Manager is an online tool developed by the U.S. Environmental Protection Agency (EPA) that allows building owners and managers to measure and track the energy and water performance of their buildings, as well as benchmark their buildings against similar buildings nationwide. The tool uses a 1-100 ENERGY STAR score to rate the energy efficiency of a building relative to its peers, where a score of 50 represents medianperformance and a score of 75 or higher indicates top performance1 . References: LEED v4 Green Associate Candidate Handbook1, ENERGY STAR Portfolio Manager

A scorecard rule for LEED Credit Point Allocation is that there is a maximum of 100 base points available for each rating system. These points are distributed among the different credit categories based on their relative contribution to the overall environmental impact and human health benefits of a project. The point allocation process is informed by a weighting methodology that uses life cycle assessment and expert judgment to assign weights to each of the LEED impact categories. The impact categories reflect the goals and priorities of LEED, such as reversing climate change, enhancing human health, protecting water resources, and promoting social equity. References: LEED v4 Impact Category and Point Allocation Process Overview1; LEED scorecard5

The methodology that is used to evaluate and study the economic performance of a building or system over its entire life is life cycle assessment (LCA). LCA is a technique that assesses the environmental aspects and potential impacts associated with a product, process, or service throughout its life cycle, from raw material extraction to end-of-life disposal or recycling7. LCA can also include an economic dimension by incorporating life cycle costing (LCC), whichestimates the total costs of ownership over the life cycle of a product or system8. By combining LCA and LCC, one can evaluate the environmental and economic performance of a building or system in a holistic way, taking into account both the initial investment costs and the long-term operational costs. This can help identify trade-offs and synergies between environmental and economic objectives, as well as opportunities for improving efficiency and reducing impacts9. References: Life-cycle assessment7; What is Life Cycle Assessment (LCA)?8; Life Cycle Costing in Construction Projects: A Case Study of a Municipal Building in Portugal9

LEED Building Design and Construction: Homes is the rating system that applies to single-family homes, low-rise multi-family homes, and mid-rise multi-family homes1. It includes the ability to reduce point thresholds for LEED certification levels based on building size, as smaller homes tend to have lower environmental impacts than larger homes2. The point thresholds are determined by the size of the house compared to the number of bedrooms1.

 2 LEED v4: Building Design + Construction Guide, Homes, p. 171 The LEED rating system - Ecohome.

The credit templates are the online forms that document the achievement of the LEED credits for a project pursuing LEED certification. The credit templates are completed and signed by the specified team member who is responsible for the credit, such as the architect, engineer, contractor, or owner. The teammember must provide the required information, calculations, narratives, and supporting documentation for each credit13. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide3

Conducting an occupant comfort survey with all building occupants is an effective way to identify occupant comfort issues in a space based on LEED best practices. An occupantcomfort survey is a tool that collects feedback from building occupants about their satisfaction with various aspects of their indoor environment, such as thermal comfort, lighting quality, acoustic quality, air quality, ergonomics, and aesthetics. An occupant comfort survey can help identify areas of improvement and potential solutions for enhancing occupant comfort and well-being. The other options are not effective ways to identify occupant comfort issues in a space based on LEED best practices. Installing energy meters in the building is a strategy that measures energy performance, but does not directly address occupant comfort. Discussing potential issues with building owner is a subjective and limited way of gathering information, as the building owner may not represent the views and experiences of all building occupants. Waiting for occupants to alert facilities management team of issues is a passive and reactive way of addressing occupant comfort, as some occupants may not voice their concerns or may have already suffered from discomfort. References: LEED Green Associate Candidate Handbook, page 25; USGBC, [Guide to LEED Certification: Commercial], page 13.

 In the commercial LEED rating systems, achieving 40-49 points will result in Silver level certification. The points are awarded based on how well the project meets various sustainability criteria set out in the LEED rating system. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Light-colored paving and cool roofs refer to materials with higher emissivity and higher albedo. Emissivity is the ability of a material to emit heat that it absorbs, while albedo is a measure of how much light that hits a surface is reflected without being absorbed. Materials with high emissivity can help reduce heat islands by releasing more of the heat they absorb, while those with high albedo can reflect more sunlight and thus stay cooler. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

High reflectance roofing materials can help reduce heat gain and peak air temperatures by reflecting more sunlight away from the building, thereby reducing the amount of heat absorbed by the roof. This can lead to lower cooling loads and energy use for air conditioning. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

LEED MPRs state:

“Must be in a permanent location on existing land… Must use reasonable LEED boundaries… Must comply with project size requirements: BD+C and O+M: minimum 1,000 sq ft…”

Only option B satisfies all these conditions.

The LEED rating system is designed to address the most important environmental impacts and human benefits of green building. The impact categories are based on the U.S. Environmental Protection Agency’s TRACI method (Tool for the Reduction and Assessment of Chemical and Other Environmental Impacts), which evaluates the potential environmental effects of a product or process over its life cycle. The impact categories are: reverse contribution to global climate change; enhance individual human health and well-being; protect and restore water resources; protect, enhance and restore biodiversity and ecosystem services; promote sustainable and regenerative material cycles; build a greener economy; enhance social equity, environmental justice, community health and quality of life. Among these categories, reducing contribution to climate change and enhancing human health and well-being have been identified as the most important ones for a LEED project to accomplish. References: LEED v4 Green Associate Candidate Handbook, LEED v4 BD+C Reference Guide

Strategies for improving building occupants’ comfort and control may consist of installing operable windows, giving occupants lighting control and providing ergonomic furniture. These strategies can enhance the indoor environmental quality (IEQ) of a building, which is the physical and psychological conditions of the indoor spaces that affect the health, comfort, and productivity of the occupants. Installing operable windows can allow occupants to adjust the natural ventilation, temperature, and fresh air intake of their spaces. Giving occupants lighting control can allow them to adjust the artificial lighting levels, color, and direction of their spaces. Providing ergonomic furniture can support the physical comfort, posture, and well-being of the occupants12. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide2

 Selecting native plants to provide habitat for local fauna is a strategy that a design team should consider in order to decrease the impact of a new construction project. Native plants are plants that have evolved in a specific region and have adapted to the local climate and soil conditions. Native plants can offer many benefits for the environment, such as:

Reducing water use and runoff by requiring less irrigation and fertilization

Enhancing biodiversity and ecosystem services by supporting native wildlife and pollinators

Improving air quality and mitigating climate change by sequestering carbon and reducing greenhouse gas emissions

Increasing soil health and stability by preventing erosion and improving infiltration

Creating a sense of place and cultural identity by reflecting the natural heritage of the region

The other options are not strategies that would decrease the impact of a new construction project. Maximizing views of the existing wetland may improve occupant satisfaction, but it does not necessarily reduce the environmental footprint of the project. Locating the project in an existing office park with ample parking may reduce land use and transportation impacts, but it may also increase heat island effect and stormwater runoff. Increasing the project’s footprint to maximize roof space for a solar array may increase renewable energy generation, but it may also increase site disturbance, material use, and energy demand. References: : Native Plants

The integrative process involves collaboration among all project team members, from initial planning through design and construction, to enhance the efficiency and effectiveness of systems. This process allows for better coordination among disciplines, leading to more efficient use of resources, improved environmental performance, reduced project costs, and enhanced occupant satisfaction. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

LEED states:

“Refrigerants have ozone depletion potential (ODP) and global warming potential (GWP)... Projects should select refrigerants with low values of both.”

This aligns with the credit “Fundamental Refrigerant Management” in LEED v4.

Building-level energy metering is a prerequisite in LEED that requires the installation of energy meters to track the total energy usage of a building12. It helps to monitor and optimize the energy performance of the building and to report the data to USGBC3. Green metering, site evaluation data, and energy savings records are not terms used in LEED.

 Flush out process is performed to remove volatile organic compounds (VOCs) from the indoor air after construction or renovation12. VOCs are chemicals that can evaporate at room temperature and cause health problems, such as headaches, nausea, and irritation3. Flush out process involves supplying 100% outdoor air to the building for a certain period of time or until a certain amount of air changes are achieved12.

Flush-out documentation | LEEDuser1

Building flushout - option 2 | LEEDuser2

Volatile Organic Compounds’ Impact on Indoor Air Quality | Indoor Air Quality (IAQ) | US EPA3

Monitoring outdoor airflow is a strategy for improving indoor environmental quality during construction. Outdoor airflow is the amount of fresh air that enters a building through natural or mechanical means. Monitoring outdoor airflow can help ensure that adequate ventilation is provided to the building during construction, which can prevent the accumulation of indoor pollutants, such as dust, debris, or volatile organic compounds, that may affect the health and comfort of the workers or occupants. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving indoor environmental quality is to “monitor outdoor airflow” [1, p. 16]. References: LEED Green Associate Candidate Handbook, [Outdoor Airflow | ASHRAE]

LEED emphasizes:

“The integrative process... encourages the project team to find opportunities to achieve synergies throughout all building systems.”

The integrative approach involves energy and water analysis in early phases to drive sustainability.

According to the LEED v4 Glossary of Terms1, a site that has been graded is commonly defined as previously developed, which means "land that has been altered by paving, construction, and/or land use that would typically have required regulatory permitting to have been initiated (alterations may exist now or in the past)"1. A greenfield is "a site not previously developed or graded that could support open space, habitat, or agriculture"1. A brownfield is "a property, the expansion, redevelopment, or reuse of which may be complicated by the presence or potential presence of a hazardous substance, pollutant, or contaminant"1. A previously undeveloped site is "a site that has never been built on or graded for development"2.

The owner is one of the team members who should participate in the initial evaluation to determine which level of LEED certification to target. The owner is the person or entity who has the authority and responsibility to make decisions about the project’s goals, budget, schedule, and design. The owner’s involvement is crucial for setting the vision and expectations for the project’s sustainability performance and selecting the appropriate LEED rating system and certification level. The LEED Green Associate Candidate Handbook states that one of the steps in the integrative process is to “engage in a preliminary LEED assessment with key project team members, including owner” [1, p. 12]. References: LEED Green Associate Candidate Handbook, [Integrative Process | U.S. Green Building Council]

Minimal hardscape and permeable surfaces allow water to infiltrate, reducing rainwater runoff and supporting sustainable stormwater management strategies. These practices align with LEED Sustainable Sites goals​​.

Green Seal is a third-party certification program that evaluates the environmental impacts of cleaning products and services. It has standards for various categories of products, such as cleaners, paper products, hand soaps, and floor care. Green Seal certified products meet rigorous performance, health, and environmental criteria. By using Green Seal certified products, projects can reduce the exposure of building occupants and maintenance personnel to potentially harmful chemicals, improve indoor air quality, and support sustainable purchasing practices. References: LEED v4 Reference Guide for Building Operations and Maintenance, p. 109 1; Green Seal website

LEED encouragesTransportation Demand Managementstrategies to reduce single-occupancy vehicle use when access to public transit is not available. One such strategy is:

“Encouraging carpooling… provides options to users in areas without access to transit.”

Offering preferred parking for single-use vehicles contradicts the intent, and LEED cannot require changes to local transit systems. Providing extra parking encourages single-occupancy vehicle use.

Building and material reuse contribute to the sustainability goals of a project by reducing the use of raw materials, which can save energy, water, and natural resources, as well as reduce greenhouse gas emissions, waste generation, and environmental impacts. By reusing existing buildings or materials, project teams can avoid the extraction, processing, transportation, and disposal of new materials, which can have significant environmental and social costs. LEED v4.1 recognizes and rewards multiple strategies for building and material reuse in the Building-Life Cycle Impact Reduction credit1.

According to the LEED credit library, the Energy and Atmosphere category for Building Design and Construction: New Construction and Major Renovation has 6 prerequisites and 11 credits, with a total of 33 possible points. The prerequisites are:

Fundamental Commissioning and Verification (required)

Minimum Energy Performance (required)

Building-Level Energy Metering (required)

Fundamental Refrigerant Management (required)

Construction Activity Pollution Prevention (required)

Advanced Energy Metering (required)

The credits are:

Enhanced Commissioning (2-6 points)

Optimize Energy Performance (1-18 points)

Advanced Energy Metering (1 point)

Demand Response (1-2 points)

Renewable Energy Production (1-3 points)

Enhanced Refrigerant Management (1 point)

Green Power and Carbon Offsets (1-2 points)

LEED certification is awarded based on the number of points a project earns across several categories of green building performance. The range of points required to achieve LEED Silver is 50-59, out of a possible 110 points. The other levels of LEED certification are: Certified (40-49 points), Gold (60-79 points), and Platinum (80 or more points)12. Therefore, if a project initially has 34 credit points,it would need 20 additional points to reach the minimum threshold for LEED Silver. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide2

One of the values and benefits of building green is that it will enhance the health of the building occupants. Building green is a process that incorporates environmental considerations into every stage of a building’s life cycle, from design to construction to operation to end-of-life. Building green can improve the indoor environmental quality (IEQ) of a building, which is the physical and psychological conditions of the indoor spaces that affect the health, comfort, and productivity of the occupants. Building green can enhance IEQ by using low-emitting materials, providing adequate ventilation, controlling temperature and humidity, optimizing daylighting and lighting quality, reducing noise levels, and promoting occupant well-being12. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide2

A 100% vegetated roof coverage best addresses both heat island effect and rainwater runoff from the roof only. A vegetated roof, also known as a green roof, is a layer of living plants thatcovers the roof surface. A vegetated roof reduces the heat island effect by providing shade, evapotranspiration, and insulation, lowering the roof temperature and the surrounding air temperature. A vegetated roof also reduces rainwater runoff by retaining and absorbing precipitation, decreasing the volume and peak flow of stormwater leaving the roof. The other options are not as effective as a 100% vegetated roof coverage in addressing both heat island effect and rainwater runoff from the roof only. A 100% high-albedo roof reflects more solar radiation than a conventional roof, reducing the heat island effect, but it does not reduce rainwater runoff. A 20% high-albedo and 80% conventional roof has a lower reflectance than a 100% high-albedo roof, resulting in a higher heat island effect, and it does not reduce rainwater runoff either. A 50% standing seam copper and 50% vegetated roof has a lower vegetated area than a 100% vegetated roof, resulting in less shade, evapotranspiration, insulation, retention, and absorption, leading to a higher heat island effect and more rainwater runoff. References: LEED Green Associate Candidate Handbook, page 27; USGBC, [Sustainable Sites], page 3.

Credit Interpretation Requests (CIRs) are a formal process for clarifying technical questions about LEED credits. Project teams submit CIRs through LEED Online to receive guidance on specific credit requirements. CIRs apply to the project in question and cannot be transferred to other projects. They are essential tools for resolving ambiguities in achieving LEED certification​​.

LEED Building Design and Construction Homes and Multifamily Low-rise is a rating system that applies to single-family homes and multifamily buildings between one and three stories. This rating system covers the design and construction phases of residential projects that areintended for human occupancy12. Projects that have more than three stories are not eligible for this rating system, but may qualify for other LEED rating systems, such as LEED Building Design and Construction Multifamily Mid-rise, which applies to multifamily buildings between four and eight stories

Harvesting rainwater reduces reliance on potable water for non-potable uses like irrigation and flushing. LEED supports this approach under Water Efficiency credits for reducing potable water consumption​​.

Sustainable landscape design aims to create landscapes that are in harmony with the local environment, conserve natural resources, and provide ecological benefits. One of the outcomes of sustainable landscape design is restoring and regenerating habitat for native plants and animals, which enhances biodiversity and ecosystem services.

LEED v4 for Building Design and Construction, p. 582

LEED Green Associate Candidate Handbook, p. 11

Should non-design team stakeholders be included in design charrettes?

No, because it may increase legal liability

Yes, because it may help to reduce future litigation

No, because they lack the expertise to contribute design ideas

Yes, because they enhance understanding of community concerns

Answer: D

Design charrettes are collaborative sessions where stakeholders brainstorm and generate design solutions for a project. Non-design team stakeholders, such as community members, clients, users, and regulators, can provide valuable input and feedback on the project goals, needs, challenges, and opportunities. Including them in design charrettes can help to create more sustainable, inclusive, and responsive design outcomes that meet the expectations and requirements of all parties involved. References: LEED Green Associate Candidate Handbook, page 14; LEED Green Associate | U.S. Green Building Council, section “LEED v4 Rating Systems”

From a LEED perspective, a brownfield site with access to multiple lines of public transportation and basic services would be the most applicable. Brownfield sites are previously developed sites that may be contaminated with hazardous waste or pollution. Developing on these sites can help to clean up and revitalize the area. Access to public transportation reduces the need for private vehicle use,reducing carbon emissions and traffic congestion. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Prerequisites and credits are the two types of requirements that make up the LEED rating system. Prerequisites are the basic elements or strategies that must be included in any LEED certified project, regardless of the rating system or the level of certification1. Credits are the additional elements or strategies that can be included in a LEED project to achieve higher levels of performance and certification1. Credits are optional and have different point values depending on their environmental benefits and impacts2. Therefore, the correct answer is B. Prerequisites are mandatory and credits are optional.

LEED v4 | U.S. Green Building Council

LEED credit library | U.S. Green Building Council

Installing a bioswale is a design technique that should be used to help prevent stormwater damage to the building and surrounding site. A bioswale is a vegetated channel that conveys stormwater runoff while filtering pollutants, reducing peak flow rates, increasing infiltration, and providing habitat. A bioswale can help prevent stormwater damage by reducing erosion, flooding, sedimentation, and contamination of waterways. The other options are not design techniques that should be used to help prevent stormwater damage to the building and surrounding site. Directing runoff into a stream is a design technique that can cause stormwater damage by increasing the volume and velocity of water entering the stream, resulting in erosion, flooding, sedimentation, and contamination of the stream. Paving the site with high Solar Reflectance Index (SRI) material is a design technique that can reduce the heat island effect by reflecting more solar radiation than conventional paving materials, but it does not prevent stormwater damage as it does not reduce runoff or improve water quality. Paving the site with impervious material is a design technique that can cause stormwater damage by preventing infiltration and increasing runoff, resulting in erosion, flooding, sedimentation, and contamination of waterways. References: LEED Green Associate Candidate Handbook, page 32; USGBC [Sustainable Sites], page 4-5.

Construction IAQ management and LEED strategies directly improve health:

“Using proper construction management practices… protects worker and occupant health by controlling pollutant sources and pathways…”

High VOC materials and low ventilation have adverse effects, not benefits.

 LEED for Neighborhood Development (LEED ND) is a rating system that aims toinspire and help create better, more sustainable, well-connected neighborhoods1. It looks beyond the scale of buildings to consider entire communities1. One of the main goals ofLEED ND is to reduce vehicle miles traveled (VMT) and greenhouse gas emissions by promoting the location and design of neighborhoods that are accessible by foot or public transportation234. Therefore, LEED ND encourages development within and near existing communities or public transportation infrastructure, which is option C.

=

LEED certification forneighborhood development

LEED for Neighborhood Development - Wikipedia

LEED® for Neighborhood Development - Grow Smart RI

LEED for Neighborhood Development - s3.amazonaws.com

The Promote Sustainable and Regenerative Material Resource Cycles impact category in LEED encourages the use of materials that can be continually cycled back into the same system at their end-of-life. This is referred to as moving to cyclical, non-depleting material cycles. It promotes the use of renewable or recyclable materials and reduces waste. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

ASHRAE 62.1 is a standard that ensures adequate ventilation is supplied to building occupants. ASHRAE stands for the American Society of Heating, Refrigerating and Air-ConditioningEngineers, a professional organization that develops standards and guidelines for the design, operation, and maintenance of buildings. ASHRAE 62.1 is a standard that specifies the minimum ventilation rates and other measures for new and existing buildings that are intended to provide acceptable indoor air quality (IAQ) for the occupants. Ventilation is the process of supplying outdoor air to or removing indoor air from a building. Adequate ventilation is important for maintaining good IAQ, which can affectthe health, comfort, and productivity of the occupants13. References: LEED v4 Green Associate Candidate Handbook1, ASHRAE’s Standard 62.13

 Volatile organic compounds (VOCs) are compounds that have a high vapor pressure and low water solubility, and are emitted as gases from certainsolids or liquids1. VOCs include a variety of chemicals, some of which may have short- and long-term adverse health effects2. Concentrations of many VOCs are consistently higher indoors (up to ten times higher) than outdoors2. VOCs are emitted by a wide array of products, such as paints, solvents, cleaners, fuels, pesticides, building materials, office equipment, etc2. Breathing VOCs can irritate the eyes, nose andthroat, can cause difficulty breathing and nausea, and can damage the central nervous system and other organs3. Some VOCs can cause cancer3. Therefore, VOCs negatively impact the quality of indoor air, which is option B.

Adaptive reuse focuses on repurposing existing materials or elements to reduce construction waste and resource use. Reusing wood floors as wall panels exemplifies this principle, aligning with LEED credits under Materials and Resources​​.

A drip irrigation system provides maximum water efficiency for a building irrigation system. A drip irrigation system delivers water directly to the root zone of plants, minimizing evaporation, runoff, and overspray. This reduces water consumption and prevents water pollution from fertilizers and pesticides. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving water efficiency in landscaping is to “use efficient irrigation systems, such as drip irrigation” [1, p. 14]. References: LEED Green Associate Candidate Handbook, [Drip Irrigation | U.S. Department of Agriculture]

The LEED Pilot Credit Library is a collection of new credits that are being tested for potential inclusion in future versions of LEED1. The purpose of the library is to allow projects to experiment with innovative strategies and provide feedback to USGBC on their effectiveness, feasibility, and market readiness2. The library also helps USGBC to respond to evolving environmental issues and stakeholder needs2.

Commissioning (Cx) ensures that building systems meet the Owner’s Project Requirements (OPR) and function as intended. It is required under EA Prerequisite: Fundamental Commissioning.

“Commissioning verifies that the building’s energy-related systems are installed, calibrated, and perform according to the owner’s project requirements.”

— LEED v4 BD+C Reference Guide, EA Prerequisite: Fundamental Commissioning

The U.S. Green Building Council (USGBC) administers the LEED rating systems development. The LEED rating systems are frameworks that provide guidance and criteria for designing, constructing, operating, and maintaining green buildings. The USGBC is responsible for developing, maintaining, and updating the LEED rating systems through a consensus-based process that involves various stakeholders, such as technical experts, industry leaders, government representatives, and public comments. The LEED Green Associate Candidate Handbook states that “USGBC is committed to transforming the way our buildings are designed, constructed and operated through LEED” [1, p. 7]. References: LEED Green Associate Candidate Handbook, [LEED Rating Systems | U.S. Green Building Council]

LEED v4 emphasizes the integrative process and early goal-setting for optimal performance outcomes. Specifically, under the Integrative Process credit and EA Prerequisite: Minimum Energy Performance, energy performance targets should be established during the programming phase:

“Establishing energy performance targets must occur during programming—before schematic design—to inform key decisions like massing, orientation, and system sizing.”

“Beginning in discovery and continuing throughout the design phases, identify and use opportunities to achieve synergies across disciplines and the building’s energy and water-related systems.”

The programming phase is when the Owner's Project Requirements (OPR) are defined, which guide energy goals, sustainability objectives, and user expectations.

Option A (Schematic Design) is too late to set foundational goals; it's used to explore options, not establish them.

Option B (Contract Administration) and C (Construction Documents) are implementation stages where design is largely finalized.

Correct phase: D. Programming, as this ensures energy targets are embedded from the beginning.

The project boundary is the area within which the project team has authority to implement the LEED requirements. It is important to clearly identify the project boundary to define the limits of site disturbance, which can affect the environmental performance of the project. For example, limiting site disturbance can help reduce soil erosion, protect natural habitats, and conserve water resources. The project boundary also determines the scope of the site assessment and the applicability of some credits. References: LEED v4 BD+C Reference Guide, Introduction, page 13

a construction waste management plan is a document that outlines how the project will reduce, reuse, recycle, or dispose of the construction and demolition waste generated on site. One of the key components of a construction waste management plan is to track and document the volume or weight of materials that are diverted from landfills or incinerators by redirecting them to other destinations, such as recycling facilities, salvage yards, donation centers, or reuse on site12.

Tracking and documenting the volume or weight of materials diverted is important for several reasons, such as:

It helps measure the performance and effectiveness of the waste management plan and identify areas for improvement.

It provides evidence and verification for LEED certification, as LEED v4 requires projects to divert at least 50% or 75% of construction and demolition waste (by weight or volume) from disposal in landfills or incineration facilities for one or two points, respectively3.

It demonstrates the environmental and economic benefits of waste diversion, such as reducing greenhouse gas emissions, conserving natural resources, saving disposal costs, and creating jobs12.

The number of dumpsters used is not a relevant metric for tracking a construction waste management plan, as it does not indicate how much waste is generated or diverted. The amount of site soils reused on the site is also not a valid indicator, as sitesoils are not considered construction and demolition waste by LEED v43. The amount of post-consumer recycled content is not related to a construction waste management plan, as it refers to the percentage of material in a product that was previously used by consumers and diverted from landfills or incinerators before being incorporated into a new product.